Marconi LORAIN RHM800E50 Manual page 47

On the gate and cathode lead terminal board, the
cathode connection is u.%alZy marked "ZP and the
gate connection is usually marked W". Zf rmy
points, refer to the equipment wiring diagram.
3.03 After all electrical connections have been made,
replace any protective grilles or covers which were
previously removed. Close the equipment access doors
Page 4
3.04 Restore input power to the equipment, and
insure that any output disconnect or protective devices
are connected or reset for normal operation. If
necessary, refer to the Starting Procedure in the
appropriate instruction manual to restore the
equipmentto normal operation.