Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. All in One Printer
  5. PIXMA MG6120 Series
  6. Getting started

Canon PIXMA MG6120 Series Getting Started

Inkjet photo all-in-one printer
Hide thumbs Also See for PIXMA MG6120 Series:

Advertisement

Quick Links

Download this manual
Canon Inkjet Photo All-In-One
Equipo multifunción fotográfico Canon Inkjet

Getting Started

Read Me First
Guía de inicio
Léame en primer lugar
Make sure to read this manual before using the machine. Please keep it in hand for future reference.
Asegúrese de leer este manual antes de usar el equipo. Consérvelo a mano para utilizarlo como referencia en el futuro.
series
ENGLISH
ESPAÑOL

Advertisement

loading

Related Manuals for Canon PIXMA MG6120 Series

Summary of Contents for Canon PIXMA MG6120 Series

  • Page 1: Getting Started

    Canon Inkjet Photo All-In-One Equipo multifunción fotográfico Canon Inkjet series Getting Started Read Me First Guía de inicio Léame en primer lugar Make sure to read this manual before using the machine. Please keep it in hand for future reference.
  • Page 2 ■ Contents ■ Symbols Used in This Document 1 Preparation P.4 2 Install the Print Head P.8 3 Install the Ink Tanks P.11 4 Align the Print Head P.14 5 Load Paper P.16 • In this guide, Windows 7 operating system is referred to as Windows 7 and Windows Vista 6 Select Connection Method P.19 operating system as Windows Vista.

  • Page 3: Machine Installation

    ■ Machine Installation Flow USB Connection ■ Flujo de instalación Conexión USB del equipo Machine Preparation Preparación del equipo Software Installation Instalación del software P.19 – 25 Network Connection Conexión de red Wireless Connection Wired Connection Conexión inalámbrica Conexión por cable Machine Wireless Setup Machine Wired Setup Configuración inalámbrica...
  • Page 4 On-screen manuals can be viewed on a computer. They are included on the Setup CD-ROM and are installed during the software installation. For some languages parts of the manual may be displayed in English. For details on opening the on-screen manuals, refer to page 49. Los manuales en pantalla se pueden ver en un ordenador.
  • Page 5 ■ Devices Required for Wireless/Wired Connection ■ Dispositivos necesarios para la conexión inalámbrica/por cable When using the machine over a wireless/wired connection, the following devices are required depending on the connection method. Cuando el equipo se utilice mediante una conexión inalámbrica/por cable, se necesitarán los dispositivos siguientes en función del método de conexión. Wireless Connection Conexión inalámbrica A commercial access point or router that supports IEEE802.11b/g/n is required.
  • Page 6 • Do not install the machine where an object may fall on it. In addition, do not place any object on the top of the machine. It may fall into the machine when opening covers, resulting in malfunction. • Paper Output Tray (A) automatically opens when printing starts. Do not place anything in front of the Paper Output Tray.
  • Page 7 Make sure all the following items are supplied. Some accessories (1) are stored within the Paper Output Tray (A). Open the Paper Output Tray to remove them. 1. Print Head 2. Ink tanks (6: M, BK, GY, PGBK, C, Y) 3.
  • Page 8 Insert the power cord into the connector on the left side at the back of the machine and into the wall outlet firmly. • Do NOT connect the USB cable or Ethernet cable at this stage. • Make sure that the Document Cover (B) is closed. Introduzca firmemente el cable de alimentación en el conector situado a la izquierda de la parte posterior del equipo y a la toma de corriente.
  • Page 9 Use the { or } button (F) on the Operation Panel to select the language for the LCD, then touch the OK button. • If an unintended language is displayed on the LCD, touch the Back button (G) to return to the Language selection screen. Utilice el botón { o } (F) del panel de control para seleccionar el idioma de la pantalla LCD y, a continuación, toque el botón OK.
  • Page 10 Lift the Scanning Unit (Cover) (A) until it stops. Close the Document Cover (B) and lift it with the Scanning Unit (Cover). Levante la unidad de escaneado (cubierta) (A) hasta que se detenga. Cierre la cubierta de documentos (B) y levántela con la unidad de escaneado (cubierta). The Print Head Holder (C) moves to the installation position.
  • Page 11 Firmly lift the part (D) of the Print Head Lock Lever in the Print Head Holder until it stops. The Print Head Lock Lever may feel heavy. • Do not touch the inside of the Print Head Holder (E). The machine may not print properly if you touch it.
  • Page 12 Tilt the Print Head forward and set it in place as shown. • Do not knock the Print Head against the sides of the holder. • Install in a well-lit environment. Incline el cabezal de impresión hacia adelante y sitúelo como se muestra. •...
  • Page 13 1. Remove the orange tape completely. 2. Remove the protective film completely. • Handle the ink tanks carefully. Do not drop or apply excessive pressure to them. • Be sure to use the supplied ink tanks. • If the orange tape remains on the L-shape air hole, ink may splash or the machine may not print properly.
  • Page 14 Tilt the ink tank, then insert it under the label and against the back end of the slot. Make sure that the color of the label matches the ink tank. • Install in a well-lit environment. Incline el depósito de tinta y, a continuación, introdúzcalo bajo la etiqueta y contra la parte trasera de la ranura.
  • Page 15 Close the Scanning Unit (Cover) (E). Make sure the Inner Cover (F) is closed. Cierre la unidad de escaneado (cubierta) (E). Asegúrese de que la cubierta interior (F) esté cerrada. Make sure that the LCD changes as shown in the illustration and go to the next step. Do not touch the OK button yet.
  • Page 16 Prepare the Paper Support (A). 1. Open it. 2. Withdraw it upwards. 3. Tilt it back. Prepare el soporte del papel (A). 1. Ábralo. 2. Tire de él hacia arriba. 3. Échelo hacia atrás. Move the Paper Guides Load a sheet of supplied specialty paper (Matte Photo Paper MP-101) (B) to both edges.
  • Page 17 Slide the left and right Make sure the Paper Output Paper Guides against Tray (E) is open, then open both edges of the paper. the Output Tray Extension (F). If printing starts while the Paper Output Tray is closed, it will automatically open. Deslice las guías Compruebe que la bandeja de papel izquierda...
  • Page 18 With the machine, the paper source varies depending on the media type. Con el equipo, el origen del papel varía en función del tipo de soporte. Specialty paper including photo paper Load paper in the Rear Tray (A). Papel especial, incluido el fotográfico Cargue el papel en la bandeja posterior (A).
  • Page 19 Pull out the Cassette (F). Extraiga el cassette (F). Move the left Paper Guide (G) to Slide the front Paper Guide (H) the edge. to align with the actual size of the paper. The front Paper Guide will click and stop when it aligns with the corresponding mark of paper size.
  • Page 20 Align the paper to the right side of the Cassette (1), and slide the left Paper Guide completely against the left edge of the paper (2). Make sure that the height of the paper stack does not exceed the line (I). Alinee el papel con el lateral derecho del cassette (1) y desplace la guía del papel izquierda por completo hasta el lateral...
  • Page 21 Intended Use Uso previsto • Want to connect to a computer with a USB cable. • Si desea conectar a un ordenador con un cable USB. • Want to connect to computers without using cables. • Want to use from multiple computers. •...
  • Page 22 Do not connect the USB cable yet. No conecte aún el cable USB. • To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer’s hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.) •...
  • Page 23 □ If you connect the machine via USB cable before installing the software: □ Si se conecta el equipo mediante un cable USB antes de instalar el software: For Windows 7 1. Remove the USB cable connected to your computer. 2.
  • Page 24 Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive. If you are using Windows, the setup program starts automatically. For Windows • If the program does not start automatically, double-click the CD-ROM icon in Computer or My Computer. When the CD-ROM contents appear, double-click MSETUP4.EXE.
  • Page 25 Click Easy Install. The drivers, application software, and on-screen manuals are installed. • If you want to select particular items to install, click Custom Install. Haga clic en Instalación simple (Easy Install). Se instalarán los controladores, el software de aplicación y los manuales en pantalla.
  • Page 26 □ USB Port □ Puerto USB When the Printer Connection screen appears, connect the machine to the computer with a USB cable. After connecting the cable, TURN ON THE MACHINE. The USB Port is located on the right side at the back of the machine.
  • Page 27 For Windows Solution Menu EX starts. For Macintosh Solution Menu EX starts when clicking OK in the Canon Solution Menu EX dialog. Remove the Setup CD-ROM and keep it in a safe place. •...

  • Page 28: Notes On Wireless Connection

    Before connecting the machine to the network, make sure that the computer and access point or router is connected. Antes de acceder con el equipo a la red, asegúrese de que estén conectados el ordenador y el punto de acceso o el router.
  • Page 29 * También se conoce como SSID. Identificador del punto de acceso específico. You can retrieve your network key by using the Canon PIXMA Wireless Setup Assistant or the instructions which can be downloaded from the Canon support webpage (www.usa.canon.com/downloadlibrary). If you are unable to retrieve the network key or other settings, refer to the manual of your access point or router, or contact its manufacturer.
  • Page 30 Use the { or } button (A) to display Setup, then touch the right FUNCTION button (B). Utilice el botón { o } (A) para acceder a Configurar (Setup); a continuación, toque el botón FUNCIÓN (FUNCTION) derecho (B). If you choose one of these connection methods, skip the “Easy Setup” section and proceed the desired section (WPS (Wi-Fi Protected Setup) or WCN (Windows Connect Now)).
  • Page 31 Select Easy setup, then touch the OK Select the access point name you wrote down on button. page 27, then touch the OK button. • If you are living in an apartment, nearby access points in use may be detected. •...
  • Page 32 Enter the network key you wrote down on page 27, then touch the left FUNCTION button (E). Touch the center FUNCTION button (F) to switch character entry modes. • Enter upper and lower case letters of the alphabet correctly. • For details on character entry, refer to the printed manual: Network Setup Troubleshooting.
  • Page 33 Read this section only when setting up a wireless connection by using the WPS (Wi-Fi Protected Setup). Use the { or } button (A) to display Setup, then touch the right FUNCTION button (B). Lea esta sección sólo si utiliza una conexión inalámbrica mediante WPS (Wi-Fi Protected...
  • Page 34 Select Other setup, then Select WPS, then touch touch the OK button. the OK button. Seleccione Otra Seleccione WPS y, configuración (Other a continuación, toque setup) y, a continuación, el botón OK. toque el botón OK. Select Push button method, then touch the OK button. •...
  • Page 35 Press and hold the WPS button on the access point (for about 5 seconds), then touch the OK button on the machine within 2 minutes. For details on the WPS button pressing, refer to the manual of your access point. The Wi-Fi lamp (blue) flashes while searching for or connecting to an access point.
  • Page 36 El equipo es compatible con “WCN-UFD”. • Canon no asume ninguna responsabilidad en el caso de que se pierdan o dañen los datos almacenados en la unidad flash USB, con independencia del motivo, incluso dentro del periodo de garantía. •...
  • Page 37 Before connecting the machine to the network, make sure that the computer and router is connected. Antes de acceder con el equipo a la red, asegúrese de que estén conectados el ordenador y el router. Internet Internet Add (connect) the machine to the network. Agregue (conecte) el equipo a la red.
  • Page 38 Remove the Cap (A), then connect a network device (router, etc.) with an Ethernet cable (B). Retire la tapa (A); a continuación, conéctese a un dispositivo de red (router, etc.) con un cable Ethernet (B). Use the { or } button (C) to display Setup, then touch the right FUNCTION button (D).
  • Page 39 Select LAN settings, then touch the Select Change wireless/wired, then OK button. touch the OK button. Seleccione Configuración de LAN Seleccione Cambiar inalámbrica/ (LAN settings) y, a continuación, cableada (Change wireless/wired) y, toque el botón OK. a continuación, toque el botón OK. Select Wired LAN active, touch the OK button.
  • Page 40 • If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network. If such a warning message appears, set the security software to always allow access.
  • Page 41 Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive. If you are using Windows, the setup program starts automatically. For Windows • If the program does not start automatically, double-click the CD-ROM icon in Computer or My Computer. When the CD-ROM contents appear, double-click MSETUP4.EXE.
  • Page 42 Click Easy Install. The drivers, application software, and on-screen manuals are installed. • If you want to select particular items to install, click Custom Install. Haga clic en Instalación simple (Easy Install). Se instalarán los controladores, el software de aplicación y los manuales en pantalla.
  • Page 43 Utilizar la impresora de la red (Use the printer on network) en When the Detected Printers List dialog box appears, select Canon MG6100 series, then click Next. When the Setup Completion dialog box appears, click Complete.
  • Page 44 Macintosh computer. Windows users: read “Information” on page 45. • The alphanumeric characters after Canon MG6100 series is the machine’s Bonjour service name or MAC address. • If the machine has not been detected, make sure of the following.
  • Page 45 • impresoras disponibles. (You have no printers available.), haga clic en Añadir (Add). Select Canon IJ Network in the pop-up Make sure that Canon MG6100 menu, select Canon MG6100 series in series is added to the list of printers. the list of printers, then click Add.
  • Page 46 Cuando aparezca la pantalla Registro de la impresora y del escáner (Register Printer and Scanner), haga clic en Registrar el escáner (Register Scanner). Select Canon MG6100 series on Click Next on the Register Printer and Scanner the Scan-from-PC Settings screen, screen.
  • Page 47 Click Next. Follow any on-screen instructions to proceed with the software installation. Haga clic en Siguiente (Next). Siga las instrucciones que aparezcan en pantalla para continuar con la instalación del software. □ Necessary Information for the User Registration □ Información necesaria para el Registro de usuario (User Registration) When the serial number is not •...
  • Page 48 For Windows Solution Menu EX starts. For Macintosh Solution Menu EX starts when clicking OK in the Canon Solution Menu EX dialog. Remove the Setup CD-ROM and keep it in a safe place. •...
  • Page 49 Using the Machine from Additional Computers Now that the wireless/wired connection of the machine is complete, it can be used from additional computers on the same network. Install software including the drivers on the computer from which you want to use the machine. Other settings are not required. To add computers from which to use the machine, go to “11 Use from Additional Computers”...
  • Page 50 If the machine is already connected to a wireless/wired connection, it can be used from additional computers on the same network. Si el equipo ya está conectado a una conexión inalámbrica/por cable, se puede utilizar desde otros ordenadores de la misma red. To use from additional computers Insert the Setup CD-ROM into the computer from which you want to use the machine.
  • Page 51 Use the Operation Panel on the machine to print your own items easily. Various application software are installed on the computer along with the drivers. You can print creative items by correcting/enhancing photos using the application software. For details on how to use the application software and the machine, refer to the on-screen manual. Utilice el panel de control del equipo para imprimir fácilmente sus propios elementos.
  • Page 52 Supported Memory Cards (Adapter required for Tarjetas de memoria compatibles (se necesita un adaptador para Memory Stick Duo Memory Stick PRO Duo Memory Stick Micro Memory Stick Memory Stick PRO SD Card SDHC Card MultiMediaCard MultiMediaCard Plus miniSD Card miniSDHC Card microSD Card microSDHC Card RS-MMC...
  • Page 53 Load 4" x 6" (10 x 15 cm) photo paper in the Rear Tray (C) in portrait orientation with the printing side facing up. Make sure that the Paper Output Tray (D) is open. If printing starts while the Paper Output Tray is closed, it will automatically open.
  • Page 54 1. Trace along the Scroll Wheel (F) to display a photo to print. 2. Touch the [+] or [-] button to specify the number of copies. 3. Touch the Color button (G). Printing will start. • When the machine is ready for printing, the Color button lights up. 1.
  • Page 55 Load A4 or Letter-sized plain 1. Open the Paper Output Tray (B). paper into the Cassette (A). 2. Open the Output Tray Extension (C). 3. Open the Document Cover (D). This section describes how to perform a standard copy. • For details, refer to "5 Load If printing starts while the Paper Output Tray is closed, it will Paper"...
  • Page 56 1. Close the Document Cover. 2. Touch the HOME button (G) to display Copy on the HOME screen. 3. Touch the left FUNCTION button (H). 4. Touch the Black button (I) or the Color button (J). Copying will start. Do not open the Document Cover until copying is complete. Remove the document after printing. •...
  • Page 57 Load 4" x 6" (10 x 15 cm) photo Start Solution Menu EX from the Canon paper in the Rear Tray (A) in Solution Menu EX icon on the desktop portrait orientation with the (Windows) or on the Dock (Macintosh), printing side facing up.
  • Page 58 SVGA 800 x 600 XGA 1024 x 768 • Easy-PhotoPrint Pro is a software plug-in for Canon Digital Photo Professional Ver. 2.1 or later, Adobe Photoshop CS4, CS3, CS2, CS and Adobe Photoshop Elements 6, 7*, and 8. * Windows only.
  • Page 59 Windows Vista o Windows XP preinstalado. • Windows: desinstale primero el software incluido con la impresora de inyección de tinta Canon antes de actualizar de Windows Vista a Windows 7 y, a continuación, vuelva a instalar el software incluido. •...

  • Page 60: Getting Help From Canon

    4550B001 PGI-225PGBK 4530B001 CLI-226C 4547B001 CLI-226Y 4549B001 Call 1-800-OK-CANON to locate a dealer near you, or visit the Canon online store at www.shop.usa.canon.com CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042 U.S.A. www.usa.canon.com QT5-3036-V01 XXXXXXXX Ayuda de Canon Soporte técnico por correo electrónico:...

This manual is also suitable for:

4503b002