Market Forge Industries STM-ED Operation, Service Manual & Parts List
Sterilmatic - digital electric sterilizer
Hide thumbs
Also See for STM-ED:
- Owner's manual (36 pages) ,
- Installation & operation manual (24 pages)
Advertisement
Quick Links
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain this
manual for the life of the equipment:
Model #: ___________________________
Serial #: ___________________________
Date Purchased: ____________________
PARTS LIST & SERVICE MANUAL
WARNING
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read
the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.
CROWN FOOD SERVICE EQUIPMENT
y
A Middleby Compan
70 Oakdale Road, Downsview (Toronto) Ontario, Canada, M3N 1V9
Telephone: 919-762-1000
www.crownsteamgroup.com
Printed in Canada
PARTS MANUAL
Advertisement
Related Manuals for Market Forge Industries STM-ED
Summary of Contents for Market Forge Industries STM-ED
- Page 1 IMPORTANT FOR FUTURE REFERENCE Please complete this information and retain this manual for the life of the equipment: Model #: ___________________________ Serial #: ___________________________ Date Purchased: ____________________ PARTS LIST & SERVICE MANUAL WARNING Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.
-
Page 2: Table Of Contents
ILLUSTRATED PARTS LIST ............9 JULY 19, 2017 STM-ED & STM-EDX STERILIZERS... -
Page 3: Door Assembly & Adjustment
Discard the old gasket, replace it with a new one (no cement is required), and reinstall the door assembly. Make an operational check for leakage and ad- just the door, if necessary. JULY 19, 2017 STM-ED & STM-EDX STERILIZERS... - Page 4 Right and Left Door Spring (sold as a 95-0124 Items 1 through 5 91-2718 pair) 10-1937 Pan Support Stud 10-1776 10-32 Machine Screw 1/2” Long 10-1939 Door Lift Spring Stud 10-2666 Door Gasket JULY 19, 2017 STM-ED & STM-EDX STERILIZERS...
-
Page 5: Fulcrum And Drain Assembly
Ball valve stein 10-3111 1/4” - 20 x 3/8 helicoil Fulcrum and drain assembly, Items 1 95-3992 10-2513 1/4” Shakeproof washer through 12, 14, 15, and 19 10-1790 1/4” - 20 Cap screw 7/8” long JULY 19, 2017 STM-ED & STM-EDX STERILIZERS... -
Page 6: Miscellaneous Components
If the Safety Valve should leak continually with a pressure build-up or should it cause an interruption on a sterilizing cycle prematurely (below 124° Centigrade on the temperature gauge), it must be replaced. Figure 5 JULY 19, 2017 STM-ED & STM-EDX STERILIZERS... -
Page 7: Troubleshooting
Unit releases pressure before cy- cle has terminated on timer. maturely. Left and/or right side(s) heating 1. Contactors of the temperature control 1. Replace switches. element(s) remain on during TIM- switch remains closed. ING/STERILIZATION cycle. JULY 19, 2017 STM-ED & STM-EDX STERILIZERS... -
Page 8: Error Codes
2. One or more probe wires are not connected 3. The probe has failed and should be replaced Once the problem has been resolved any key press will clear the error and stop the buzzer JULY 19, 2017 STM-ED & STM-EDX STERILIZERS... -
Page 9: Illustrated Parts List
3/8 – 3/8 – 3/8 FPT Tee, Brass 95-3216 5/8” OD Copper Tubing, Soft, 9” Length 10-7987 3/8” IPS Close Nipple 10-1057 3/8” IPS Straight Union, Brass * Reserved for secondary temperature probe used only for testing calibration of autoclave. JULY 19, 2017 STM-ED & STM-EDX STERILIZERS... - Page 10 14-0177 Contactor, 2 Pole 14-0174 Axial Fan, 230V 14-0149 Printer 14-0161 Controller Board 14-0472 Low Water LED 10-5990 Low Water Cutoff 14-0162 Power Switch 14-0181 Power Supply 14-0180 Fuse, Slo-Blo 14-0178 Fuse Holder JULY 19, 2017 STM-ED & STM-EDX STERILIZERS...
- Page 11 Lower Case, Front Access Panel 10-6363 Insulation, Body 10-6365 Insulation, Back 10-6364 Insulation, Bottom 95-0465 Bottom Cover for Elements 98-4217 Cylinder, 208V - 240V (Shown with Door Assy.) 10-5938 Plate, Drain Panel Clean Instr JULY 19, 2017 STM-ED & STM-EDX STERILIZERS...
- Page 12 Outside Case, Right Side 95-3194 Outside Case, Back 10-0226 Handle Bumper 95-3484 Terminal Box Cover 95-2545 Pan Rack, 1 Left & 1 Right 95-2637 Condensate Baffle, Upper 95-3207 Perforated Water (Splash) Baffle 95-3284 Wear Strip JULY 19, 2017 STM-ED & STM-EDX STERILIZERS...
- Page 13 ILLUSTRATED PARTS LIST Door Handle Assembly JULY 19, 2017 STM-ED & STM-EDX STERILIZERS...
- Page 14 1/4”-20 Machine Screw 5/8” Lg. 95-0190 Door Lock Casting Assy. (Items 1 through 6) 95-0145 Door Lock Knob Assy. (Items 1 through 7) 95-0144 Complete Door Handle Assy. (Items 1 through 13) 95-0198 Handle Bushing (Not Shown) JULY 19, 2017 STM-ED & STM-EDX STERILIZERS...
Need help?
Do you have a question about the STM-ED and is the answer not in the manual?
Questions and answers