Bosch Rexroth Diax 04 Instruction Manual page 35

Rexroth Diax 04 HDD and HDS
Avoiding Dripping or Sprayed
DOK-DIAX04-HDD+HDS*UL*-IB01-EN-P
addit-
ional
blower
Fig. 5-28: Example of arrangement for multiple-line structure with components
Arrangement of Cooling Units
CAUTION
Due to the operating principle, condensation water is formed when cooling
Water units are used. For this reason, please observe the following information:
•
Always position cooling units in such a way that condensation water
cannot drip onto electronic equipment in the control cabinet.
•
Position the cooling unit in such a way that the blower of the cooling
unit does not spray accumulated condensation water onto electronic
equipment.
conveying direction of heated air
in flow-off area
intake area of cooling air for
upper device line
conveying direction of heated air
in flow-off area
intake area of cooling air for
lower device line
Possible damage to the drive controller
Operational safety of the machine endangered!
Note the following instructions!
5-17
Instructions for Use
outlet air to
cooling unit
air guide
supply air
from cooling
unit