Regulatory Information - Canon MultiPASS F30 User Manual

• Do not press down hard on the platen glass cover when using the platen glass to scan thick books. This
may damage the platen glass and/or result in personal injury.
• Do not fix your eyes on the luminous source while making copies and scanning, as this may result in
personal injury.
• Do not subject the F30 MFP to strong physical shock or vibration.
• Turn off the power and unplug the F30 MFP before moving it.
• Do not lift the F30 MFP by any of its attachments.
• If the F30 MFP exhibits a distinct change in performance, this indicates a need for servicing.
Maintenance
Do not service the F30 MFP yourself except as specifically described in this guide. If further
servicing is required, contact the Canon Customer Care Center.
• Keep the F30 MFP clean. Dust accumulation may prevent the F30 MFP from operating properly.
Printhead and Ink Tanks
For safety, always store printhead and ink tanks out of the reach of small children. If a child
accidentally licks or ingests any ink, consult a physician immediately.
Never subject a printhead or ink tank to shocks or excessive vibration. Shaking could cause ink
to leak and stain clothing.
Never touch the printhead or electrical contacts on a printhead immediately after removing it
from the F30 MFP. These metal parts become very hot during printing and could cause minor
burns.
Turning the F30 MFP Off
To avoid equipment malfunction always use the O O N N / / O O F F F F button to turn the F30 MFP on and off. Never remove
the power cord from the power outlet until you have turned off the F30 MFP by pressing the O O N N / / O O F F F F button.
Once off, you can unplug the power cord from the power outlet.
Using the Printer Near Appliances and Fluorescent Lamps
Allow at least 6 inches clearance between the F30 MFP and another appliance or a fluorescent lamp. Electrical
noise generated by a fluorescent lamp placed too close to the F30 MFP could cause the F30 MFP to
malfunction.

Regulatory Information

MultiPASS F30 MFP Color Printer, Model Number H12220
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
5 5 1 1