Pause Or Stop Cooking - Whirlpool WMG30SB User Instructions

PAUSE OR STOP COOKING

To pause cooking:
the cooking can be paused to check, add or turn or stir the food by opening the door.
press stop button once ,the functions can be paused as what they are, press stop but-
ton twice,the functions will stop.
the setting will be maintained for 5 minutes.
To continue cooking:
Close the door and press the Jet start button. the cooking is resumed from where it
was paused.
If you don't want to continue cooking you can:
remove the food, close the door and press the stop button.
When the cooking is finished:
the display will show the text "end". an acoustic beep will signal once a minute for 2 minutes.
please note that reducing or stopping this programmed cooling cycle will not have a ne-
gative impact on the functioning of the product.
CLOCK
to set the Clock of your appliance:
q
In standby, touch the Clock button once. the
display shows the current clock.
w
press +/- to set the hour.
e
press Clock/Jet start button to confirm.
r
press +/- to set the minute.
t
press Clock/Jet start to confirm the setting.
every time after cooking process is completed,
the screen shows "end" and issued a prompt un-
til opened the door to return standby (no operati-
on for 10 minutes the system automatically return
to standby).
tips and suggestions:
• when plug in, the screen shows "12:00" ( "12"
flashing ), 1 minute later return to standby
(before returning standby can directly set clock).
• In the process of cooking, press STOP button
once to pause, press Jet start button to
continue cooking, but press stop twice to
cancel this program.
• In the process of cooking set, if no operation
system automatically return to standby mode in
1 minute.
11