Table of Contents
Advertisement
STAND-bY MODE
The oven is in Stand-by mode when the clock is displayed (or, if the clock has not been
set, when the display will show ":").
START PROTECTION / CHILD LOCK
This automatic safety function is activated one minute after the oven has returned to
"Stand-by mode".
When the safety function is active the door must be opened and closed in order to start
the cooking, otherwise the display will show "door".
PAUSE OR STOP COOKING
To pause cooking:
The cooking can be paused to check, add or turn or stir the food by opening the door.
Press STOP button once ,the functions can be paused as what they are,press STOP button
twice,the functions stopped.
The setting will be maintained for 5 minutes.
To continue cooking:
Close the door and press the Jet Start button. The cooking is resumed from where it was
paused.
If you don't want to continue cooking you can:
Remove the food, close the door and press the Stop button.
When the cooking is finished:
The display will show the text "End". An acoustic beep will signal once a minute for 2 minutes.
Please note that reducing or stopping this programmed cooling cycle will not have a ne-
gative impact on the functioning of the product.
ADD / STIR / TURN FOOD
i
Depending on the selected function, it could be needed to add / stir / turn food during
cooking. In these cases the oven will pause cooking and it will ask you to perform the nee-
ded action.
When required, you should:
* Open the door.
* Add or Stir or Turn the food (depending on the required action).
* Close the door and restart by pressing JET START button.
Notes: if the door is not opened within 2 minutes from the request to Add or Stir or Turn
the food, the microwave oven will continue the cooking process (in this case the final re-
sult may not be the optimal one).
DOOR
EN
11
Advertisement
Chapters
Table of Contents
