Prior To Connecting; Installation - Whirlpool WMG30SB User Instructions

PRIOR TO CONNECTING

position the microwave oven at a distance from
other heating sources. for sufficient ventilation,
there must be a space of at least 30 cm above the
microwave oven.
the microwave oven should not be placed in a cabi-
net. this microwave oven is not intended to be pla-
ced or used on a working surface lower than 850
mm above the floor.
* Check that the voltage on the rating plate corresponds to the voltage in your home.
* place the microwave oven on a stable and even surface that is strong enough to hold
the microwave oven and the food utensils you put in it. use carefully when handling.
* ensure that the space underneath, above and around the microwave oven is empty to
allow for proper airflow.
* ensure that the appliance is not damaged. Check that the microwave oven door is clo-
sed firmly against the door support and the internal door seal is not damaged. empty
the microwave oven and clean the interior with a soft, damp cloth.
* do not operate this appliance if it has a damaged mains cord or plug, if it is not working
properly, or if it has been damaged or dropped. do not immerse the mains cord or plug
in water. keep the cord away from hot surfaces. electrical shock, fire or other hazards
may result.
electrical shock hazard
disconnect power before servicing.
replace all parts and panels before
operating.
failure to do so can result in death, fire,
or electrical shock.
excessive weight hazard
use two or more people to move and
install microwave oven.
failure to do so can result in back or
other injury.
NOTE:
prior to using the microwave for the first time, it is recommended to remove the protec-
tive film from the control panel and the cable tie from the power cord.

INSTALLATION

plug into a grounded 3 prong outlet.
do not remove ground prong.
do not use an adapter.
do not use an extension cord.
failure to follow these instructions
can result in death, fire, or electrical
shock.
30cm
electrical shock hazard
3