Load Paper - Canon imageCLASS MF5550 Setup Sheet

Load paper.

1 Pull out the paper cassette completely.
3 Load the paper into the cassette. Make sure
the paper stack sits below the hooks.
Hooks
5 Even out the edges of the paper stack.
Make sure the height of the paper stack does
not exceed the limit marks
NOTE
If you do not completely insert the cassette into the machine, paper jams may occur.
2 Pinch and slide the rear paper end guide to
match the size of paper.
4 Pinch and slide the side paper end guides to
match the size of paper.
6 Insert the paper cassette back into the
machine as far as it will go.
.
Hook