Connect the power cord.
1
Plug the power cord into the rear socket . Then connect the other end of the cord
to the wall outlet .
IMPORTANT
Use of a power cord with ferrite cores (included) is required to comply with class limits in Subpart B of Part 15 of the FCC
Rules.
2
When you connect the machine, the following messages should appear in the LCD.
IMPORTANT
For important safety instructions on installation and handling of the machine, see p. xiii of the Basic Guide.
NOTE
Make sure the correct paper size is specified in the machine. For details, see p. 2-7 of the Basic Guide.
Approx. 7 seconds