Canon imageCLASS MF5530 Setup Sheet page 7

Canon imageclass mf5530: software guide

Hide thumbs Also See for imageCLASS MF5530:

When the installation is complete, click [Finish] to close the InstallShield Wizard.

When prompted to connect the USB cable, click [OK]. Make sure the machine's power

is turned on, and connect the cable to the USB port on the back of the machine.

Then connect the other end of the cable to the USB port on your computer.

Click [Exit] to close the MF5550/MF5530 Main Menu. Remove the imageCLASS

MF5500 Series User Software CD from the CD-ROM drive and store it in a safe place.

Table of Contents