Canon Powershot S100 2MP Digital Elph Software Manual page 79

Starting the Plug-In Module
1. Click the [Get Photo] button at the upper left of the window.
2. Click [Get Photo] from the tab that displays and select [Cameras].
3. In the "Select Input Source" dialog, select [Canon Didital Camera] and
click the [OK] button.
These three steps are not required after the first time.
4. Click the [Camera] icon.
The Plug-In Module will start.
5. Click the icon and set the communication settings.
This step is only required for connections via the USB or serial ports.
• USB Interface
Confirm that [USB Port] and your camera model have been selected and click
the [Set] button.
• Serial Interface
Select the port and baud rate settings and click the [Set] button.
For instructions on the communication settings, please refer to page 82.
Loading Images from the Camera
1. Click the [Camera] button.
Click the [Computer] button if you are loading images directly from a CF card.
The images from the camera or CF card will display in the thumbnail display area.
2. Select an image and click the [Acquire] button.
3. In the [Untitled] column of Adobe PhotoDeluxe, input a file name and
click the [Save] button.
The thumbnails will appear in the My Photos window at the lower right of the
Adobe PhotoDeluxe window.
4. Click the [Quit] button.
You can display an image at a larger size by double-clicking it in the My Photos
window.
79