Canon Powershot S100 2MP Digital Elph Software Manual page 16

16
Installing the USB Driver into Windows 2000
Begin by logging onto the computer as the Administrator and then install the USB
driver.
1. Once you have attached the USB cable to the camera and computer, set
the camera to the mode for communicating with a computer. (
• PowerShot S100 DIGITAL ELPH/DIGITAL IXUS
Slide the mode switch to the
the power.
• PowerShot S10/S20
Turn the mode dial to the
The "Add New Hardware Wizard" dialog will appear after a moment.
2. Read the dialog and click the [Next] button.
3. Select [Search for a suitable driver for my device (recommended)] and
click the [Next] button.
The dialog will change to the one that allows you to specify the search location.
4. Place the Canon Digital Camera Solution Disk in the CD-ROM drive.
position and press the main switch to turn on
position.
Your camera model
name will appear
here.
p. 12)