Canon Powershot S100 2MP Digital Elph Software Manual page 12

12
1. Attach the supplied USB cable to a USB port directly on the computer
and to the DIGITAL terminal on the camera as shown below.
• There is no need to turn the camera or computer power off when attaching or
detaching the USB cables.
• Please consult your computer's manual for the location of the USB ports.
DIGITAL Terminal
1. Open the DIGITAL terminal cover
2. Install the USB driver the first time you connect via a USB port. (
Precaution for Unplugging Cables
from the DIGITAL Terminal
• Always press the [PUSH] button on the
connector to detach the cable from the
camera's DIGITAL terminal.
by slipping a fingernail under the
top edge and pulling down.
2. Insert the connector so that the
the connector and camera align.
USB Port
USB Connector
USB Connector
marks on
PUSH Button
p. 13)