Canon Powershot S100 2MP Digital Elph Software Manual page 78

78
What to Do if the "ImageBrowser not found" Dialog Appears
If you install only the Canon Digital Camera Plug-In Module without ImageBrowser,
the "ImageBrowser not found" dialog may display. If this happens, use the following
procedures to prevent ImageBrowser from attempting to start automatically.
1. Click the [OK] button on the "ImageBrowser not found" dialog.
2. In the "Settings for USB connection" dialog, click the [The application program
below will start.] option to clear the check mark.
3. Close the "Settings for USB connection" dialog.
This will prevent the "ImageBrowser
not found" dialog from appearing
again when the camera is
connected.
• The "Settings for USB connection"
dialog can be opened by choosing
the Apple menu
[Control Panels] and [Canon USB
Camera]. (
Click here to close the dialog.
CF Card Reader or PC Card Slot Interface
1. Place the CF card into the CF card reader or into the PC card adapter and
then into the PC card slot. (
2. Start Adobe PhotoDeluxe. (
Serial Interface
About AppleTalk
When connected to the printer or modem port via AppleTalk, choose the Apple
menu , select [Chooser] and set AppleTalk to [Inactive].
1. Connect the camera to the computer with the serial cable. (
2. Turn the camera's mode dial to the
3. Start Adobe PhotoDeluxe. (
and selecting
p. 64)
Click here to clear the check mark.
p. 61)
p. 79)
position.
p. 79)
p. 62)