Canon Powershot Pro1 Quick Start Manual page 3

6
Preparing to Download Images to a Computer
Never connect the camera to the computer before the
software is installed.
List of Things to Prepare
● Camera and computer
● Canon Digital Camera Solution Disk provided with the camera
● Interface cable (use the cable provided with the camera)
A.
Computer system requirements
■ Windows
OS Windows 98 (First or Second Edition)
Windows Me
Windows 2000
Windows XP (Home Edition, Professional)
Computer Model The above OS should be pre-installed on
computers with built-in USB ports.
CPU Windows 98/Windows Me/Windows 2000:
Pentium 150 MHz or higher processor
Windows XP:
Pentium 300 MHz or higher processor
For all of the above OSs:
Pentium 500 MHz or higher processor is
recommended (for editing movie).
RAM Windows 98/Windows Me/Windows 2000:
64 MB or more
Windows XP:
128 MB or more
For all of the above OSs:
128 MB or more is recommended
(for editing movie).
Interface USB
● Canon Utilities
Free Hard Disk Space
- ZoomBrowser EX:
(Including the PhotoRecord printing program)
- PhotoStitch:
● Canon Camera TWAIN Driver: 25 MB or more
● Canon Camera WIA Driver:
Display 800 x 600 pixels/High Color (16 bit) or better is
required.
1,024 x 768 pixels or better is recommended.
■ Macintosh
OS Mac OS 9.0 – 9.2, Mac OS X (v10.1/v10.2)
Computer Model The above OS should be pre-installed on
computers with built-in USB ports.
CPU PowerPC
RAM Mac OS 9.0 – 9.2:
64 MB or more of application memory
Mac OS X (v10.1/v10.2): 128 MB or more
Interface USB
● Canon Utilities
Free Hard Disk Space
- ImageBrowser:
- PhotoStitch:
Display 800 x 600 pixels/32,000 colors or better is
required.
1,024 x 768 pixels or better is recommended.
All procedures performed with a connection to a USB 2.0
compliant board are not guaranteed.
➜
B.
Install the Software.
a.
Place the Canon Digital Camera Solution Disk in the computer's
CD-ROM drive.
• With Mac OS X, double-click the CD-ROM icon,
followed by the [Mac OS X] and [Canon Digital
Camera Installer] (
• With Mac OS 9, double-click the CD-ROM icon,
followed by the [Mac OS 9] and [Canon Digital
Camera Installer] (
b.
Click the Digital Camera Software [Install] button and click [Next].
c.
Select [Easy Installation] and click [Next].
Proceed with the installation while reviewing installation settings.
200 MB or more
40 MB or more
25 MB or more
d.
When the installation is over, select [Yes, I want to restart my
computer now.] in the screen below and click [Finish].
120 MB or more
30 MB or more
e.
Remove the disk from the CD-ROM drive after restarting.
Software Starter Guide
) icons.
) icons.
Once the installation is
complete, click [Quit].
C.
Connect the camera to the computer.
a.
Connect the supplied interface cable to the computer's USB
port and the camera's DIGITAL terminal.
USB port
Terminal cover
Interface
cable
Once connected, the camera and the computer will be able to
automatically communicate.
■ Windows XP
After a few moments, the dialog box
shown to the right will appear and the
USB driver provided with your Windows
OS will automatically be installed.
■ Windows 2000 / Windows Me / Windows 98
After a few moments, the Add New Hardware Wizard will appear and
automatically install the USB driver.
■ Mac OS X ■ Mac OS 9
a. If iPhoto or Image Capture
a. Confirm that [Display
are running, click on in Images] is selected and click
the upper left corner of the
the [OK] button.
window to close the
application.
b. Double-click the [Canon
ImageBrowser] icon on the
desktop.
c. Click [Canon Camera] in
the Explorer View section.
Explorer View
Once [Communication Settings]
appears, click the [Set] button.
1. Open the terminal cover
with your fingernail.
2. Hold the USB connector so
the [ ] side is up, then
insert it into the DIGITAL
terminal securely.
To the DIGITAL terminal
The name of your
camera model or
[Canon Camera] and
the USB port
number (e.g. @1)
will appear here.