Table of Contents
Advertisement
Options Summary
Enabled - Robot set Watch Dog Timer (WDT) after POST completion, before
BIOS transfer control to OS.
WARNING: Before enabling this function, a program in OS must be in
responsible for clearing WDT. Also, this function should be disabled if OS is
going to update itself.
OS Timer (minute)
Timer count set to Watch Dog Timer for OS loading.
Delayed POST (PEI phase) Disabled
Enabled - Robot holds BIOS from starting POST, right after power on. This
allows BIOS POST to start with stable power or start after system is physically
warmed-up.
Note: Robot does this before 'Sends watch dog'.
Delayed time (second)
Period of time for Robot to hold BIOS from POST.
Delayed POST (DXE
phase)
Enabled - Robot holds BIOS before POST completion. This allows BIOS POST
to start with stable power or start after system is physically warmed-up.
Note: Robot does this after 'Sends watch dog before BIOS POST'.
Delayed time (second)
Period of time for Robot to hold BIOS from POST.
Reset system once
Enabled - Robot resets system for one time on each boot. This will send a soft
or hard reset to onboard devices, thus puts devices to more stable state.
Soft or hard reset
Select reset type robot should send on each boot.
Chapter 3 – AMI BIOS Setup
3
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Enabled
10
Optimal Default, Failsafe Default
Disabled
Optimal Default, Failsafe Default
Enabled
10
Optimal Default, Failsafe Default
Disabled
Optimal Default, Failsafe Default
Enabled
Soft reset
Optimal Default, Failsafe Default
Hard reset"
46
Advertisement
Table of Contents
