Precor Experience 600 Series Service Manual page 133

2. Install the fan
points into the MC housing (the fan must push the air into to MC housing). If replacing
the older fan with the newer fan, the new fan cable routing has changed. Feed the
power cable thru the right cable housing opening (not the left opening) and install the
new fan.
3. Reinstall the fan grill
screws.
4. Reconnect the fan power cable and install the top cover onto the MC housing. Make
sure that the power cable is not pinched or damaged while snapping the top cover
into the housing tabs. Secure the top cover to the MC housing cover using the one
screw fastener
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
onto the top cover so that the embossed air flow indicator arrow
onto the fan
.
6 Replacement Procedures
Motor Controller Fan Replacement
and top cover . Secure with the four #2
Page 123