For Better Sound (For Dvd Features); External Input Mode (For Vcr Features) - FUNAI D8A-A4110DB Owner's Manual

E8G06ED(EN).fm Page 7 Friday, July 27, 2007 8:51 PM
If your TV has no scart input jack but has an
S-VIDEO input jack,
1) Follow the steps 1) 4)
to in the "Connecting to a TV".
2) Connect the S-VIDEO OUT jack on this unit to the
S-VIDEO input jack on your TV.
3) Connect the ANALOG AUDIO OUT jacks of this unit
to the analogue audio input jacks of your TV.
4) Plug in the TV and this unit.
Note: •
The S-VIDEO connection only supplies video
(picture) in the DVD mode.
• Set "DOLBY DIGITAL" to "PCM" for the Audio
setting in the setup mode.
Playing a DVD using incorrect settings may generate
noise distortion and may also damage the speakers.
(Refer to page 24.)
DVD/VCR
DVD
COMPONENT VIDEO OUT
C R / C B /
Y Audio cable
P P
R B
DIGITAL ANALOG S-VIDEO
(not supplied)
AUDIO OUT AUDIO OUT OUT
L
OPTICAL COAXIAL
R
(Back of the unit)
If your TV has the COMPONENT VIDEO input jacks,
1) 4)
1) Follow the steps to in the "Connecting to a TV".
2) Connect the COMPONENT VIDEO OUT jacks on this
unit to the COMPONENT input jacks on your TV.
3) Connect the ANOLOG AUDIO OUT jacks of this unit
to analogue audio input jacks of your TV.
4) Plug in the TV and this unit.
Note: • If your TV is compatible with progressive scanning
(525/625), connect the TV to the COMPONENT
VIDEO OUT jacks of this unit and set "VIDEO
OUT" to "Component (P)" in the DISPLAY menu.
Next, set your TV to the progressive scan mode.
(Refer to page 23.)
• If your TV is not compatible with progressive
scanning, set "VIDEO OUT" to "Component (I)" in
the DISPLAY menu. (Refer to page 23.)
DVD/VCR
Component Video cable
(not supplied)
DVD
COMPONENT VIDEO OUT
C / C /
R B
Y Audio cable
P P
R B
DIGITAL ANALOG S-VIDEO
AUDIO OUT AUDIO OUT OUT (not supplied)
L
OPTICAL COAXIAL
R

For Better Sound (for DVD Features)

These 2 connections are optional for better sound.
1) For clear digital sound quality, use the DIGITAL AUDIO
OUT (either OPTICAL or COAXIAL) jack for the
connection to your digital audio system.
•If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will produce
a strong, distorted sound or no sound at all.
Dolby Digital decoder
or MPEG decoder
DIGITAL
AUDIO OUT
DVD/VCR
OPTICAL COAXIAL
Hints for connecting to a Dolby Digital
decoder or MPEG decoder
• By connecting this unit to a Multi-channel Dolby Digital
• A digital component with a built-in MPEG 2 or Dolby
• If output is Dolby Digital encoded audio, connect to a
• If output is MPEG encoded audio, connect to an MPEG
Hints for connecting to an MD deck or DAT
TV
deck
• The audio source on a disc in a Dolby Digital Multi-
AUDIO
IN
L S-VIDEO
S-Video cable
IN
• Unless connected to a Dolby Digital decoder, set "DOLBY
R
(not supplied)
• Set "DOLBY DIGITAL" and "MPEG" to "PCM" in the
2) For dynamic sound effects, use the ANALOG AUDIO
TV
COMPONENT
VIDEO IN
Y
C /P
B B
C /P
R R
AUDIO
IN
S-VIDEO
L
IN
R

External Input Mode (for VCR Features)

Digital Audio
Connect an external device (a decoder, a camcorder, etc.) to
Input jacks
the AV2 (DECODER) jack. Press
OPTICAL COAXIAL
buttons
If you use the front AUDIO/VIDEO input jacks, press
with
or
screen.
Optical Coaxial
cable cable
If you use the AV1 (TV) jack for connecting a device, press
(not supplied) (not supplied)
0
TV screen.
7
decoder, you can enjoy high-quality Multi-channel Dolby
Digital surround sound as heard in the movie theaters.
TM
Digital allows you to enjoy the surround sound while
producing the effecting of being in a movie theater or a
concert hall.
Dolby Digital decoder, and set "DOLBY DIGITAL" to
"BITSTREAM" in the AUDIO menu. (Refer to page 24.)
decoder, and set "MPEG" to "BITSTREAM" in the
AUDIO menu. (Refer to page 24.)
channel surround format cannot be recorded as digital
sound by an MD or DAT deck.
DIGITAL" to "PCM" in the AUDIO menu. Playing a
DVD using incorrect settings may generate noise
distortion, and damage the speakers. (Refer to page 24.)
AUDIO menu for connecting to an MD deck or DAT
deck. (Refer to page 24.)
OUT jacks for the connection to your audio system.
AUDIO SYSTEM
Audio cable
(not supplied)
ANALOG
AUDIO OUT
L
R
DVD/VCR
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories.
'MP3 SURROUND' and its logo are trademarks
of Thomson S.A.
Note: Supply of this product does not convey a license nor
imply any right to distribute content with this product in
revenue-generating broadcast systems (terrestrial, satellite,
cable and/or other distribution channels), streaming
applications (via Internet, intranets and/or other
networks), other content distribution systems (pay-audio
or audio-on-demand applications and the like) or on
physical media (compact discs, digital versatile discs,
semiconductor chips, hard drives, memory cards and the
like). An independent license for such use is required. For
details, please visit http://mp3licensing.com.
, so that "AV2" appears on the TV screen.
the Number buttons , so that "AV3" appears on the TV
, 1 with the Number buttons , so that "AV1" appears on the
Audio
L R
0 0 2 the Number
, , with
0 0 3
, ,
0
,
EN