Table of Contents
Advertisement
E8G06ED(EN).fm Page 20 Friday, July 27, 2007 8:51 PM
Note: •
Virtual Surround will not be effective if the sound
mode is set to something other than "STEREO" (for
Audio CDs only). (Refer to page 19.)
•
Turn down the level or turn it "OFF" if the sound is
distorted.
•
The setting will be saved even if this unit is turned off.
•
This function cannot be used during x1.3 and x0.8
Rapid Play with Voice. (Refer to page 18.)
Track Search
CD
There are three ways to begin the playback of a specific track
on a disc.
Using the Number buttons
1) Press
the Number buttons
number.
•Playback will start at the selected track.
•For any discs, to play a single-digit track, press the
number directly (e.g. for track 3, press
•For the disc with less than 100 tracks, to play a double-
digit track, press
+10
, then the number (e.g. for track 26,
press
+10
,
2
,
6
).
•For the disc with more than 100 tracks, to play a double-
digit track, press
+10
,
0
, then the number of the track.
+10
(e.g. for track 26, press
+10
digit track, press
, then the number of the track (e.g.
for track 126, press
+10
,
Using SEARCH
1) Press
SEARCH
.
•The Track Search display appears.
2) Within 30 seconds, select a desired track number using
the Number buttons
.
•Playback will start at the selected track.
•For the disc with more than 10 but less than 100 tracks,
to play a single-digit track, press
of the track (e.g. for track 3, press
•For the disc with more than 100 tracks, to play a single
or a double-digit track, press
the track (e.g. for track 3, press
0
2
6
press
,
,
).
•In any other cases, just press the number of the track.
Using SKIP H G
During playback, press
SKIP
G
Press it repeatedly to skip subsequent tracks.
SKIP
Press
to go back to the beginning of the current
H
track. Press it repeatedly to go back to the previous tracks.
•Track number will appear briefly on the front panel
display.
•If
SKIP
are pressed while the playback is paused,
H G
the playback will be paused again after skipping to the
next track.
•During Dual Playback, using
affect MP3 tracks.
•To skip JPEG files, use
s
is set to "MUSIC",
SKIP
MP3 and JPEG files.
Note: • SKIP
are not available when playback is
H G
stopped.
Chapter / Title Search
Using SEARCH
1) During playback, press
SEARCH
Search, twice for the Title Search.
/29
MP3
JPEG
DivX
®
to enter the desired track
3
).
0
2
6
,
,
,
). To play a triple-
1
,
2
,
6
).
0
first, then the number
0
,
3
).
0
first, then the number of
0
0
3
,
,
and for track 26,
to move to the next track.
SKIP
will only
H G
or
. If the "SLIDE SHOW"
B
are available for both
H G
DVD-V
once for the Chapter
20
2) Enter the desired chapter/title number using
buttons
.
Using the Number buttons
1) During playback, press
the Number buttons
desired chapter number.
•Playback will start at the selected chapter.
•For single digit chapters (1-9), press a single number
(e.g. to play chapter 3, press
•To play chapter 26, press
+10
Note: •
Depending on the disc being played, using
the Number buttons
cannot be performed.
Using SKIP H G
During playback, press
SKIP
G
Press it repeatedly to skip subsequent chapters.
Press
SKIP
to go back to the beginning of the current
H
chapter. Press it repeatedly to go back to the previous chapter.
Time Search
1) During playback, press
SEARCH
Time Search screen appears on the TV screen.
TOTAL
2) Within 30 seconds, enter a desired disc time using
the Number buttons
.
•Playback will start at the specified time.
•For DVDs, enter a desired time of the current title.
•For Audio CDs and discs with DivX
desired time of the current track.
CLEAR
•Press
to erase the incorrect input.
Note: •
"0" appears automatically when there is no need to
enter a number. For example, "0:0_:_ _" appears in
the Time Search display if the total time of the disc or
track is less than 10 minutes.
•
Time Search is not available on some discs.
Marker Setup
Use markers to memorise your favourite places on a disc.
SEARCH
1) During playback, press
Marker Setup screen appears on the TV screen.
2) Press
or
to select 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 and
s
B
ensure that "_ _ _ _:_ _:_ _" appears in the display.
3) When the disc reaches the desired point, press
•The Title or Track and elapsed time will appear on the
TV screen.
4) To return to the marker later, press
until the Marker Setup screen appears and
choose the desired marker, then press
5) Press
SEARCH
RETURN
or
to exit.
Note: •
Opening the disc tray, turning off the power or
selecting "AC" at step
2)
and press
markers.
•
To clear a marker, use
s
number to be cleared, and then press
•
You can mark up to 10 points.
the Number
to enter the
3
).
,
2
,
6
.
to go to the next chapter.
DVD-V
CD
DivX
®
repeatedly until the
1:29:00
files, enter a
®
DVD-V
CD
repeatedly until the
ENTER
.
SEARCH
repeatedly
or
to
s
B
ENTER
.
ENTER
will erase all
or
and select the marker
B
CLEAR
.
EN
Hide quick links:
Advertisement
Table of Contents
