Auto Repeat Playback; Picture Select; Auto Return; Index Search - FUNAI D8A-A4110DB Owner's Manual

E8G06ED(EN).fm Page 11 Friday, July 27, 2007 8:51 PM
<Note for "Speed Search" and "Still Picture">
• Usually there will be video "noise" lines (black and white
streaks or dots) on the screen. This is normal.
The still picture will, in addition to containing the "noise"
lines, be black and white.
This is not a fault of the unit but merely a by-product of
the technology involved in producing a DVD/VCR with
LP mode.
Slow Motion
PAUSE
• Press , then to reduce the playback speed.
F g
The unit mutes the sound during slow motion. You can
control the speed by pressing
Press PLAY to return to normal playback.
B
• If it is left in the Slow mode for more than 5 minutes, the
unit will automatically switch to the Stop mode.

Auto Repeat Playback

The unit has an auto repeat function that allows you to repeat
a tape indefinitely without touching
• Use the remote control for this procedure.
• Insert a pre-recorded tape.
1) Press VCR , then SETUP .
2) Press or to select "SET UP", then press
K L
3) Press
or to select "AUTO REPEAT".
K L
4) Press
so that "ON" appears next to "AUTO REPEAT"
B
on the TV screen.
•When in Stop mode, Auto Repeat mode will start
automatically.
•If the on-screen menu still remains, press
then press PLAY .
B
Note: • Once you select the Auto Repeat mode, it stays in
effect even after you turn off the unit.
To Stop Playback
STOP
Press .
C
To Exit the Auto Repeat Mode
Repeat steps 1) to 3) . Then, press
"OFF" will appear next to "AUTO REPEAT" on the TV
SETUP
screen. Press to exit.
MENU
TIMER
SET UP
INITIAL

Picture Select

This function enables you to select the picture quality of a
tape.
• Use the remote control for this procedure.
1) Press VCR , then SETUP .
2) Press
or to select "SET UP", then press
K L
3) Press
or to select "PICTURE".
K L
4) Press until the desired mode (NORMAL, SOFT or
B
SHARP) is indicated on the TV screen.
5) Press SETUP to exit.
(faster) or (slower).
g h
PLAY .
B
.
B
SETUP to exit,
.
B
MENU
TIMER
SET UP
INITIAL
SET UP
[ ON ]

AUTO RETURN

[ ON ]
AUTO REPEAT
PICTURE [ NORMAL ]
.
B
11
Note: • Once you select the Picture Select mode, it stays in
effect even after you turn off the unit.
MENU
TIMER
SET UP
INITIAL
Auto Return
When Timer Recording is finished, the unit will automatically
rewind the tape to the beginning where it started recording.
If there are any remaining programmes including Daily,
Everyday or Weekly, Auto Return will not operate.
1) Press VCR SETUP
, then .
2) Press or repeatedly to point to "SET UP", then press
K L
.
B
3) Press or to point to "AUTO RETURN", then press
K L
.
B
"ON" will appear next to "AUTO RETURN".
4) Press SETUP
.
Watch the Recorded Timer Programme
Press T-SET to turn on the unit and press
PLAY .
B

Index Search

This function enables you to search the beginning of the
desired programme recorded an index mark.
• The index mark will be made automatically when
REC/OTR is pressed. It will also be marked at the starting
point of Timer Recording and OTR.
• The index mark is not recorded if
released during recording.
• The time gap between index marks on the tape should be
greater than 1 minute for SP recording and 2 minutes for
LP recording.
• Use the remote control for this procedure.
1) Press VCR , then SEARCH .
2) Press
or repeatedly until the number of programmes
K L
that you want to skip appears.
3) Press
or to start Index Search.
s B
•The unit begins rewinding or fast forwarding to the
beginning of desired programme. When the preset
programme is reached, the unit will start playback
automatically.
Note: • Index Search can be set up to 20.
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds
2) 3)
from steps to , otherwise the Index Search mode
will be cancelled.
•
To exit the Index Search mode, press
or press STOP after step
C
MENU
TIMER
SET UP
INITIAL
SET UP
[ ON ]
AUTO RETURN
[ ON ]
AUTO REPEAT
PICTURE [ NORMAL ]
VCR , then press
PAUSE is pressed and
F
SETUP 2)
in step
3) .
EN