Status Display; Real Time Tape Counter; Automatic Operations; Dvd Operation - FUNAI D8A-A4110DB Owner's Manual

Dvd/cd player & video cassette recorder
Hide thumbs Also See for D8A-A4110DB:
Table of Contents

Advertisement

E8G06ED(EN).fm Page 15 Friday, July 27, 2007 8:51 PM

Status Display

To check the Counter, or Clock & Channel number, press
DISPLAY
. Each time you press
change as illustrated:
When you select the channel using
the desired channel (position number).
<OFF mode>
<COUNTER mode>
SP
Press once.
0:12:34
Press once.
Note: •
If the on-screen display or indicators on the front
panel show an abnormal reading or no reading,
unplug this unit for 30 seconds, then replug it again.
Please note that clock and timer settings will be cleared
after disconnection.

DVD Operation

Basic Playback

DVD-V
CD
Getting started
• Turn on the power of the TV, amplifier and any other
components which are connected to this unit.
• Make sure the TV and audio receiver (commercially
available) are set to the correct channel.
• Make sure that the DVD OUTPUT indicator is lit. If not,
press
DVD
to switch to DVD mode.
1) Press
STANDBY-ON
.
2) Press
OPEN/CLOSE
to open disc loading tray.
3) Place the chosen disc on the tray, with the label facing up.
4) Press
PLAY
.
B
•The tray will close automatically, and playback will then
start from the first chapter or track of the disc.
•When you play back a DVD with a title menu
recorded, it may appear on the screen. In this case, refer
to "Title Menu".
5) Press
STOP
to stop playback.
C
Note: •
A "prohibited icon" may appear at the
top-right on the TV screen during
operation, warning that a prohibited
operation has been encountered by this
unit or the disc.
Some DVDs may be played from title 2 or 3 due to
specific programmes.
During the playback of two layered disc, pictures may
stop for a moment. This happens while the 1st layer is
being switched to the 2nd layer. This is not a
malfunction.
DVDs recorded with the NTSC system can be viewed
on PAL, NTSC or Multi system TV. (Refer to page
23.)
Depending on the TV, when playing back a NTSC
DVD on a PAL TV, the picture may roll up or down,
shrink vertically and black bars may appear at the both
top and bottom of the screen.
DISPLAY
, TV screen will
the Number buttons
, select
<CLOCK and CHANNEL
NUMBER mode>
17:40
SP
P02
Press once.
MP3
JPEG
DivX
®
15

Real Time Tape Counter

• This counter shows the elapsed recording or playback time
in hours, minutes, and seconds on screen. (Nothing is
shown in the case of blank portion.)
• The front panel display shows elapsed time in hours and
minutes.
• The " – " indication will appear when the tape is rewound
further than the tape counter position "0:00:00".

Automatic Operations

Automatic Rewind, Eject
When the end of a tape is reached during recording, playback
or fast-forward, the tape will be automatically rewound to the
beginning. After that, the unit will eject the tape.
• The unit will not rewind the tape automatically during
Timer Recording or One Touch Recording.
Tape Eject
A tape can be ejected with the unit power on or off (but the
unit must be plugged in).
• If a Timer Recording is set, press
eject a tape.
It may take a time to deliver the picture or the sound.
This is not a malfunction.
You can change the on-screen language in "PLAYER
MENU" setting. (Refer to page 23.)

General Features

DVDs may contain menus to navigate the disc and access
special features. Enter the appropriate
press
Cursor
K / L /
/
to highlight your selection in the
s
B
ENTER
DVD menu and press
to confirm.
Note: •
Unless stated, all operations described are based on
remote control use. Some operations can be carried
out with the buttons on the front panel.

Disc Menus

1) Press
MENU
.
•The DVD menu will appear.
2) If the feature is not available,
the TV screen.
3) If disc menu is available on the disc, audio languages,
subtitle options, chapters for the title and other options
will appear for selection.
4) Press
Cursor
K / L /
/
to select an item, and press
s
B
ENTER
to confirm selection.

Title Menu

1) Press
TOP MENU
.
•The title menu will appear.
2) If the feature is not available,
the TV screen.
3) Press
Cursor
K / L /
/
to select an item, and press
s
B
ENTER
to confirm selection.
•Playback will begin at the selected title.
STOP/EJECT
twice to
Number buttons
or
DVD-V
symbol may appear on
DVD-V
symbol may appear on
EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D8a-a4110dbn

Table of Contents