Table of Contents
Advertisement
E8G06ED(EN).fm Page 14 Friday, July 27, 2007 8:51 PM
When an OTR or a Timer Recording is completed...
• If Auto Power Off for DVD has been activated and there
are Timer Recordings on standby, the unit turns off
automatically, and the
indicator on the front panel
display lights up to indicate the unit is in the timer standby
mode.
• The
indicator on the front panel display flashes if there
are no more Timer Recordings on standby.
• If Auto Power Off for DVD has NOT been activated, the
unit switches to the DVD mode and all the VCR function
will be unavailable. The
long as the DVD is in use. All the DVD functions are
available during OTR, timer standby mode and Timer
Recording.
If you want to use the unit during a Timer
Recording or while the
flashing.
• Press
STANDBY-ON
to turn on the unit. Press
remote control to choose DVD mode, then continue with
the other DVD features as described in this manual. You
don't need to set the TIMER off to use the unit.
Note (for Timer Recording) :
• If there is a power failure or the unit is unplugged for more
than 30 seconds, clock and all timer settings will be lost.
Copying a Video Tape
You can make copies of videotapes made by friends or relatives
for your own enjoyment.
Connect the recording DVD/VCR (this unit), playing VCR
(another VCR) and your TV as outline in the following
diagrams.
Using scart jacks
Playing VCR
to 21-Pin Scart jack
DVD
COMPONENT VIDEO OUT
C
/
C
/
R
B
P
R
P
B
DIGITAL
ANALOG
AUDIO OUT
AUDIO OUT
OPTICAL COAXIAL
indicator will not appear as
indicator is on or
DVD
on the
Recording DVD/VCR
(this unit)
AERIAL
Y
S-VIDEO
OUT
VCR
AV2 (DECODER)
L
DVD/VCR
AV1 (TV)
RF OUT
R
to 21-Pin Scart jack
(TV)
14
Using AV front terminals
Playing VCR
to the video output jack
to the audio output jack
Recording DVD/VCR (this unit)
STANDBY-ON
REW
F.FWD
STOP/EJECT
PLAY REC/OTR
to 21-Pin Scart jack
1) Insert a pre-recorded videocassette into the playing VCR.
2) Insert video cassette tape with its erase-prevention tab in
place into the cassette compartment of the recording unit.
3) Press
SPEED/SYSTEM
to select the desired recording
speed (SP/LP).
4) Select "AV2" or "AV3" position on the recording unit.
See "External Input Mode (for VCR Features)". (Refer to
page 7.)
5) Press
REC/OTR
on the recording unit.
6) Begin playback of the tape in the playing VCR.
7) To stop recording, press
STOP/EJECT
unit, then stop playback of the tape in the playing VCR.
Note: •
For best results during dubbing, use the unit's front
panel controls whenever possible. The remote control
might affect the playing VCR's operation.
•
If video or colour fades in and out, you may be
copying a copy guarded video tape.
•
Unauthorised recording of copyrighted materials may
infringe on the rights of copyright owners, violate
copyright laws and may not record clearly.
Recording from DVD to VCR
You can copy a DVD to a videotape. This will be possible only
if the DVD is not copy protected.
1) To activate DVD function, press
2) Insert an uncopyrighted DVD, then press
point where you want to start recording.
3) Press
VCR
, then insert a tape with its erase-prevention tab
in place. Make sure the VCR is in Stop mode after you
find your recording point.
4) Press
SPEED/SYSTEM
to choose your recording speed.
"SP" or "LP" appears on the front panel display.
5) Press
0
0
4
the Number buttons
,
,
with
appears on the front panel display.
6) Press
REC/OTR
.
7) Press
DVD
PLAY
, then press
B
8) To stop recording, press
VCR
Note: •
You cannot copy DivX
®
limited playable times to a videotape.
OPEN/CLOSE
PAL
OUTPUT
VCR
DVD
CHANNEL
STOP
PLAY
to AV1 (TV)
Scart jack on
the back of the
DVD/VCR
(TV)
on the recording
DVD
.
PAUSE
at the
F
, then "disc" briefly
.
STOP
, then
.
C
files restricted with the
EN
Hide quick links:
Advertisement
Table of Contents
