Canon Powershot G1 Software Starter Manual page 77

Serial Interface
1. Attach the camera to the computer with the serial cable.
Refer to Where to Find Instructions for Attaching Your Camera to a
Computer (
2. Set the camera to the mode for communicating with a computer.
3. Start ImageBrowser.
Double-click the [Canon ImageBrowser] icon on the desktop to start the program.
If the [Canon ImageBrowser] icon does not appear on the desktop, open the [Canon
Utilities] folder and [ImageBrowser] folder and double-click the [ImageBrowser] icon.
4. Click the [Canon Camera] button.
The camera's images will display as small thumbnail images in the ZoomBrowser EX
Camera Window. (
p. ii) for connection instructions.
Canon ImageBrowser Icon
p. 74)
73