Canon Powershot G1 Software Starter Manual page 48

44
Connecting via a CF Card Reader or PC Card Slot
1. Place the CF card into the CF card reader or into the PC card adapter and
then into the PC card slot.
Refer to Where to Find Instructions for Attaching Your Camera to a
Computer (
2. Click the Windows [Start] menu and select [Programs], [Adobe],
[Photoshop Limited Edition] and [Adobe Photoshop Limited Edition].
Adobe Photoshop LE will start.
3. Click the [File] menu and select [Import] and [Select TWAIN_32 Source]
4. Choose an appropriate source and click [Select].
Select either [Canon XXX USB], where the XXX represents your camera model
name, or [Canon Digital Camera RS-232C] as the source as appropriate.
If several models are listed, select the one that corresponds to your camera.
5. Click the [File] menu and select [Import] and [TWAIN_32]
The TWAIN Driver will start.
Connecting the Camera to a Serial Interface
1. Attach the camera to the computer with the serial cable.
Refer to Where to Find Instructions for Attaching Your Camera to a
Computer (
2. Set the camera to the mode for communicating with a computer.
3. Click the Windows [Start] menu and select [Programs], [Adobe],
[Photoshop Limited Edition] and [Adobe Photoshop Limited Edition].
Adobe Photoshop LE will start.
4. Click the [File] menu and select [Import] and [Select TWAIN_32 Source]
5. Choose [Canon Digital Camera RS-232C] and click [Select].
6. Click the [File] menu and select [Import] and [TWAIN_32]
The TWAIN Driver will start.
p. ii) for connection instructions.
p. ii) for connection instructions.