Installing And Removing The Battery - Canon EOS 1D Mark II Instruction Manual

Installing and Removing the Battery

Installing the Battery
If the battery's rubber lining (to repel water) is not clean, use
a moist cotton swab to wipe it clean.
Checking the Battery Level
4
When the < > switch is set to <
indicated as follows:
20
1
Detach the battery compartment
cap.
¡Grasp both sides of the cap and pull it
off.
2 Insert the battery.
¡Insert the battery and while pushing it
in, turn the release handle as shown
by the arrow.
Rubber lining
1
> (p.27), the battery level will be
z : Battery level OK.
x : Battery level is low.
b
: Battery will be exhausted soon.
n
: Battery must be recharged.