Canon EOS 1D Mark II Instruction Manual page 144

¡
When printing with a PictBridge or Bubble Jet Direct printer, be sure to
set the paper size.
¡
With PictBridge, the file No. cannot be imprinted.
¡
If [Borders] is set, the date might be imprinted on the border, depending
on the printer.
¡
The date might look light if it is imprinted on a bright background or
border.
¡
With CP Direct, if [Print type] is set to [Index], the number of images
printed on one index sheet will be as follows:
• Credit card size:
• L size:
• Postcard size:
As for the number of index images with Bubble Jet Direct, see the BJ
printer's instruction manual.
¡
If you stopped the printing and want to continue printing the remaining
images, select [Resume]. Note that printing will not resume if you stop
the printing and any of the following occurs:
• You changed the print order.
• You deleted an image that was selected for printing.
• The memory card's remaining capacity was low when you stopped the
printing.
¡
If there is a printing problem, see page 128 for PictBridge, page 131 for
CP Direct, or page 134 for Bubble Jet Direct.
144
5 Start printing.
¡Select [OK].
s
The printing will start.
¡To stop the printing, press the
X
< > button while [Stop] is
displayed, then press [OK].
20 images
42 images
63 images