Replacing The Date/Time Battery - Canon EOS 1D Mark II Instruction Manual

Replacing the Date/Time Battery

The date/time (back-up) battery's service life is about 10 years. If the
date/time is reset, replace the back-up battery with a new CR2025
lithium battery as described below.
(+)
4
1 Set the <
and remove the battery pack.
¡The back-up battery is on the ceiling of
the battery compartment.
2
Remove the back-up battery
cover.
¡As shown in the diagram, loosen the
screw to remove the cover.
3
Remove the battery.
4
Install a new back-up battery.
¡The plus side of the battery must face
up.
5 Attach the cover.
¡Install the battery and turn the <
switch to <
displayed on the LCD monitor. Set the
the date/time.
2
> switch to <
1
>. The date/time will be
>
4
>
39