Troubleshooting - Scheppach PM1200 Translation Of Original Instruction Manual

14. Troubleshooting

Problem Possible causes
Engine does not Engine, cable or connector defective,
run. fuses burnt.
Engine does not Circuits in the network are overloaded
reach full power. (lamps, other engines, etc.)
Motor overheats Overloading of the engine, insufficient
easily. cooling of the engine.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Remedies
Have the machine checked by a specialist. Never repair
the engine yourself. Attention! Check the fuses and
replace them if necessary.
Do not use any other devices or engines on the same
circuit.
Avoid overloading the engine during mixing and remove
dirt from the engine to ensure optimum engine cooling.
GB | 21