Advertisement
Setting up
The LED TWISTER IV is supplied with IEC power lead(s) which should be connected to a suitable mains outlet.
Ensure the correct voltage as stated on the unit and that mains lead and connections are in good condition.
Layout
Operation
The LED TWISTER IV is operated by sound activation.
Connect mains power to the IEC inlet (2) using the power lead provided, ensuring that the correct voltage is supplied (90 - 250Vac)
Direct the front of the LED TWISTER IV with the lens pointing towards the area to be lit.
Ensure that the front is not pointing directly into peoples' eyes at close range.
Switch on power to the unit using the on/off rocker switch (1)
Play music at the required volume and adjust the Microphone sensitivity (4) as required using a small screwdriver. Adjusting fully
clockwise will result in almost continuous rotation and adjusting fully anti-clockwise will result in the LED beams remaining mostly
static.
Switch off the power when not in use and disconnect from the mains if not being used for long periods.
Specifications
Power supply
Fuse
Power consumption
LEDs
Controls
Dimensions
Weight
Disposal: The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines
1
Illuminated power on/off switch
2
Mains inlet IEC & fuse holder
3
Safety mounting eye bolt
4
Microphone sensitivity control
5
Sound activation microphone
90-250V, 50/60Hz (IEC)
T2AL
15W
3 x 3W (red, green & blue)
Power on/off & mic sensitivity
175 x 150 x 110mm
940g
Errors and omissions excepted.
Copyright© 2017. AVSL Group Ltd.
152.628UK User Manual
Advertisement
