Common Attributes; Query Commands - Panamax VT1512-IP Instruction Manual

Common Attributes

Some message elements will include a timestamp attribute "time". The timestamp is in standard UNIX time, up to 10 decimal digit characters, and represents the number of seconds that have
passed since January 1st 1970 GMT.
Some message elements involve a group of outlets. Outlet group values are given as hexadecimal digits, representing which outlets participate in the group. A group value is encoded in a
12-bit binary bitmap, using the hexadecimal digits. To process the data it must be converted from hexadecimal to binary, where each bit represents an outlet participating in the group. Bit 0
represents outlet #1. The following table should help clarify:
<dlys>
<dly id="1" sf="12" so="1" cy="10"/>
<dly id="2" sf="11" so="2" cy="10"/>
<dly id="3" sf="10" so="3" cy="5"/>
<dly id="4" sf="9" so="4" cy="10"/>
<dly id="5" sf="8" so="5" cy="10"/>
<dly id="6" sf="7" so="6" cy="10"/>
<dly id="7" sf="6" so="7" cy="15"/>
<dly id="8" sf="5" so="8" cy="10"/>
<dly id="9" sf="4" so="9" cy="10"/>
<dly id="10" sf="3" so="10" cy="10"/>
<dly id="11" sf="2" so="11" cy="15"/>
<dly id="12" sf="1" so="12" cy="10"/>
</dlys>
<grps>
<sq>13f</sq>
<cy>f35</cy>
</grps>
Where "id" is the outlet number, "sf" is the turn off delay, "so" is the turn on delay and "cy" is the power cycle delay. The designation "sq" is the bitmap for outlets to be sequenced, and "cy"
is the bitmap for outlets to be power cycled.

Query Commands

Send Information Query
The Send Information query is used to retrieve general information about the device. Response information elements are enclosed in the <info> element.
Query –
<sendinfo/>
Sample Response –
<info time="1234567890">
<sernum>PAVT1512PRO0X142160000000</sernum>
<fwver>1.0.0.12520</fwver>
<bootcodever>1.0</bootcodever>
<ipaddr>3194548209</ipaddr>
<coprocfwver>1.0.0.12520</coprocfwver>
<coproclot>1300795003</coproclot>
<coprocdiex>5</coprocdiex>
<coprocdiey>42</coprocdiey>
<coproctest>65272</coproctest>
</info>
Details –
Element Description
sernum serial number of the product.
fwver version of firmware running on the master processor.
bootcodever version of boot loader firmware running on the master processor.
ipaddr Internet Protocol address in use, decimal value.
coprocfwver version of firmware running on the co-processor.
All other elements are for Core Brands use only.
Send Status Query
The Send Status query is used to retrieve the device status. Response status elements are enclosed in the <status> element.
Query –
<sendstatus/>
www.panamax.com
7