Panamax VT1512-IP Instruction Manual page 11

Details –
Element Description
powercond power condition: 0 = now normal; 1 = now fault recovery; 2 = now under voltage; 3 = now over voltage.
Settings Event
The Settings event is posted when the device's configuration settings change. Information for all settings is transmitted, not just for the individual settings that changed.
Sample Event –
<settings>
... (see Common Attributes section) ...
</settings>
Details –
Element Description
Set device configuration settings. See Common Attributes section for details.
Scheduled Action Fired Event
A Scheduled Action Fired event is posted when the device performs a scheduled operation.
Sample Event –
<schedmgr>
<fire>
<day>127</day>
<min>775</min>
<command><outlet id="7">0</outlet></command>
</fire>
</schedmgr>
Details –
Element Description
schedmgr container identifies event as a scheduled action.
fire container identifies scheduled action as fired.
day the scheduled days of the week to fire the command. See table below for encoding details.
min the scheduled minute of the day (since midnight) to fire the command.
command container identifies the action command. See Action Commands section for details.
The <day> element represents the "daysofweek" value for the days of the week the action command is scheduled to fire. This element is a bit tricky in that the scheduled
days are encoded in a 7-bit binary bitmap that is provided in decimal format. To process the data it must be converted from decimal to binary where each bit represents a
day of the week the action command is scheduled. Bit 0 represents Thursday.
Scheduled day(s) of the week days of week Binary
Thursday 1 0000001
Friday 2 0000010
Saturday 4 0000100
Sunday 8 0001000
Monday 16 0010000
Tuesday 32 0100000
Wednesday 64 1000000
Monday – Friday 115 1110011
Saturday-Sunday 12 0001100
www.panamax.com
11