MS 231 HB
MICROPHONE STAND WITH ROUND BASE
AND ONE-HAND CLUTCH
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 94 19-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and have
it recycled to promote sustainable economic activity.
CAUTION: If the brake shoes are not used for a long time, they can stick to the
inside of the tube. Please loosen the clamps before storing (pull off the upper
tube and loosen the hexagon nut a little). Alternatively, fix the operating lever
of the tripod with a cable tie or similar in the pressed position.
Gravity
is a registered brand of the Adam Hall Group
®
FEATURES
• Straight microphone stand with heavy-duty base
• Fast and convenient single-handed height adjustment
• Durable, rugged design
• Max. height 175 cm, min. height 108 cm
• Additional weight disc as accessory (article no. GMS2WP)
DESCRIPTION
The GMS 231 HB is a premium-quality microphone stand with thick walled tubing,
black powder-coated finish and 175 cm maximum height. The exceptionally
stable round base is made of heavy-duty cast iron, while a rubber ring on the
bottom ensures acoustic isolation and surface protection.
The GMS 231 HB features a new and especially convenient single-handed
height adjustment function fitted with a non-slip ergonomic handle that
makes it very easy to use at all times. The custom-designed retainer requires
no tools for quick and secure microphone clip attachment.
VARIWEIGHT
®
compatible – patented stability system for secure holding and
simple transportation by means of an insertable weight disc.
An additional set of black coding rings is included with the GMS 231 HB; more
ring packs are available in a wide array of colours for clear personalization.
For increased stability, a 2.3 kg weight disc is available as an accessory
(article no. GWS2WP) that is easy to assemble without tools.
SPECIFICATIONS
Product number
Product type
Type
Tubing material
Tubing colour
Tubing surface
Min. height
Max. height
Transport length
Height adjustment
Base type
Base material
Base diameter
Base weight
Interchangeable rings
Black ring pack included
Weight
Adam Hall GmbH | Adam-Hall-Str. 1
61267 Neu-Anspach | Germany
GMS231HB
Stands and Tripods
Microphone Stands
Steel
Black
Powder coated
1080 mm
1750 mm
1080 mm
Yes
Round base
Cast iron
270 mm
3.6 kg
1 x 20 mm
Yes
4.4 kg
Phone: +49 60 81 · 94 19-0
adamhall.com
Need help?
Do you have a question about the MS 231 HB and is the answer not in the manual?
Questions and answers