GRAVITY LS 431 B Manual

LS 431 B
LIGHTING STAND WITH SQUARE STEEL BASE
AND ECCENTRIC MOUNTING OPTION

SAFETY INFORMATION

1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0

PROPER DISPOSAL OF THIS PRODUCT

(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
Adam Hall GmbH · Adam-Hall-Str. 1· 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com

FEATURES

• Large heavy steel base for stability
• Base with 3 M20 female threads
• 35 mm extension with M10 female thread
• 2.4 m maximum height

DESCRIPTION

The GLS 431 B lighting stand features a large heavy steel base providing a
firm footing and three M20 female threads that allow to mount off-centre.
The 35 mm extension with female threaded M10 insert permits a maximum
height of 2.4 m. Two integrated base handles facilitate transport.

SPECIFICATIONS

Product number GLS431B
Product type Stands and Tripods
Type Lighting Stands
Tube material Steel
Tubing color Black
Tubing surface Powder coated
Min height 1420 mm
Max height 2420 mm
Transport length 1420 mm
Height adjustment Set screw and safety pin
Number of extensions 1
Base material Steel
Material of height adjustment Steel
Dimensions Base (W x H x D) 563 x 563 x 15 mm
Base weight 14 kg
Interchangeable rings 1 x 30 mm
Black ring pack included Yes
Max. load capacity 20 kg
Weight 17.8 kg