GRAVITY KS TS 01 B Quick Start Manual

KEYBOARD STAND TABLE
KS TS 01 B
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assem-
bly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information
from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: https://
cdn-shop.adamhall.com/media/pdf/Manufacturers-Declarations-GRAVITY_DE_
EN_ES_FR.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indi-
cates that this appliance may not be treated as household waste. This is to avoid
environmental damage or personal injury due to uncontrolled waste disposal.
Please dispose of this product separately from other waste and have it recycled
to promote sustainable economic activity.
Gravity is a registered brand of the Adam Hall Group
®
FEATURES
– Super sturdy construction
– Suitable for heavy keyboards
– Highly adjustable
– VARI®-FOOT included
INTRODUCTION
This keyboard stand with table-like construction offers superior stability making
it particularly suitable for heavy keyboards. It is height-adjustable in small
incremental steps, making the stand suitable for both seated and standing
applications.
The legs can be fitted in two basic configurations – either perpendicular to the
vertical structure or angled outwards slightly – the latter configuration offers
additional stability and more leg room. The top rests can be adjusted to the
width of the keyboard and can also be angled in small incremental steps
over a range of 360 degrees. All in all, this solid steel construction comprises all
features possible in such a design without compromise.
For transport, both the legs and the top rest can be folded inwards, resulting in
a very compact transport height. The stand includes one VARI®-FOOT leveling
foot to compensate for ground irregularities.
SPECIFICATIONS
Product type:
Type:
Material:
Surface:
Colour:
Decks:
Support arm length:
Support arm spacing adjustment range:
Min height:
Max height:
Width:
Width when folded:
Max. load (support):
Interchangeable rings:
Black ring pack included:
Weight:
Adam Hall GmbH | Adam-Hall-Str. 1
61267 Neu-Anspach | Germany
Stands and Tripods
Keyboard stand
Steel
Powder coated
Black
1
340 mm
230 mm – 730 mm
735 mm
900 mm
950 mm
1300 mm
90 kg
6 × 20 mm, 6 × 30 mm
Yes
6.9 kg
Phone: +49 60 81 · 94 19-0
adamhall.com