GRAVITY MS 23 XLR B Manual

MS 23 XLR B
MICROPHONE STAND WITH XLR CONNECTOR
AND GOOSENECK
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/Manufacturers-Declara-
tions-GRAVITY_DE_EN_ES_FR.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
Adam Hall GmbH · Adam-Hall-Str. 1· 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
Features
XLR gooseneck for direct microphone attachment
XLR mic cable input at the bottom end of the tube
Heavy cast iron base for excellent stability
Description
Enabling ultra exible microphone orientation, this premium quality stand
features a 36.5 cm gooseneck on a thick walled 114.5 cm tube and a
heavy duty round base made of cast iron.
The gooseneck integrates a 3-pin female XLR connector for directly attaching
a microphone while the tube sports a lateral XLR mic cable connector at the
bottom end. This permits quick, clean setup without mic clips and running the
cable up the stand.
To extend the stand's height and increase stability, additional XLR
goosenecks (item no. GMAGOOSEMXLR) and a weight disc
(item no. GMS2WP) are available as accessories.
Speci cations
Product type Stands and Tripods
Type Microphone Stands
Tubing material Steel
Tubing colour Black
Tubing surface Powder coated
Max. height 1510 mm
Base type Round base
Base material Cast iron
Base diameter 270 mm
Base weight 3.6 kg
Weight 4.3 kg