Selecting An Effect - Canon MV920 Instruction Manual

Fade out: During recording, press the D.EFFECTS button and pause
recording by pressing the start/stop button.
The fader can be activated/deactivated by pressing the D.EFFECTS button.
:
4. Fade in: In playback pause mode, press the
D.EFFECTS button and begin playback by pushing
the joystick (
Fade out: During playback, press the D.EFFECTS
button and pause playback by pushing the joystick
( ) towards
The fader can be activated/deactivated by pressing the D.EFFECTS button.

Selecting an Effect

In
* Not available if the TV type is set to [NORMAL TV].
MENU
( 33)
1. Open the FUNC. menu and select (
effects icon.
2. Select (
3. Select (
the menu.
The symbol of the selected effect will appear on screen.
4. Press the D.EFFECTS button.
• The symbol of the selected effect will turn green.
• The effect can be activated/deactivated by pressing the
D.EFFECTS button.
Turn off the digital effect when you do not use it.
The camcorder retains the setting even if you turn it off or change the recording
program.
The image quality may be slightly lower with digital effects.
Digital effects cannot be used in the following cases:
- When the program selector is set to
- During DV dubbing.
Downloaded From VideoCamera-Manual.com Manuals
) towards / .
/ .
mode, set the program selector to
*
D.EFFECT OFF
) the [EFFECT] option and press (
) a setting option, press (
.
) the digital
).
) and close
.
E
53