OSD warning messages
When the monitor does not support a particular resolution mode, the following
message is displayed.
This message indicates that the monitor cannot synchronize with the signal that it
is receiving from the computer. See
Monitor specifications
for the Horizontal and
Vertical frequency ranges addressable by this monitor. Recommended mode is 1920 x
1080 (S2422HZ)/2560 x 1440 (S2722DZ).
The following message is displayed before the DDC/CI function is disabled.
When the monitor enters the Standby mode, the following message is displayed.
Activate the computer and wake up the monitor to gain access to the OSD.
Operating the monitor
|
53