Download Print this page

Dell S300 Firmware Upgrade Setup Manual page 9

Hide thumbs Also See for S300:

S300w/S300wi Wireless Firmware Upgrade Setup

NOTE: Wireless firmware upgrades set are the same for the S300w and S300wi models.

NOTE: Wireless firmware upgrades steps are the same for the Win OS and Mac OS.

Part A: Enable Wireless or LAN on the Projector

1. Connect the power cable and turn on the projector by pressing the power button.

2-1. If the LAN cable is used for firmware upgrade, follow these steps to re-active Wireless/LAN feature

when the Wireless/LAN is Off: SET UP → Wireless / Network → On → Wireless → Disconnected. Go to

Step 3-1.

2-2. If the Wireless Connection is used for firmware upgrade, follow these steps to re-active wireless

connection when the wireless connection is Disconnect: SET UP → Wireless / Network → On → Wireless

→ Connected. Go to Step 3-2.

S300w S300wi