Download Print this page

Dell S300 Firmware Upgrade Setup Manual page 5

Hide thumbs Also See for S300:

9. Follow these steps to upgrade firmware:

Step A: Click "Browse" to find the firmware (*.img) from downloaded Projector FW folder.

Step B: Click "DownLoad" to pop-up the dialog.

Step C: Click "YES" to start the upgrade projector firmware.

Step D: Start to Erasing projector.

Step E: Download and upgrade firmware.

WARNING: When you are in downloading mode, PLEASE do not press the keyboard.

Step F: Firmware completed, press "OK" and plug out the USB cable from projector.

10. Unplug and re-plug in the power cord to turn on S300, S300w or S300wi projector.

NOTE: If you have installed Dell Flasher Tool and USB driver once, you may skip steps 1~ 3 and 6, and

only proceed step 4, 5 and 7~10 afterward to upgrade the projector firmware.

S300w S300wi