Specifications; Enclosure Cleaning - Cambridge SoundWorks NEWTON T300 User Manual

SPECIFICATIONS

T300:
Dimensions (H x W x D): 45 x 7
3
Base width: 12 / inches
4
Weight: 70 pounds
The T300 can be safely used with receivers rated above
30 watts per channel. There is little advantage to using a
receiver larger than 150 watts per channel with these speak-
ers, but any size receiver may be used should it be available,
so long as the receiver is not operated at excessive levels.
T500:
Dimensions (H x W x D): 48 x 8
3
Base width: 12 / inches
4
Weight: 81 pounds
The T500 can be safely used with receivers rated above
30 watts per channel. There is little advantage to using a
receiver larger than 200 watts per channel with these speak-
ers, but any size receiver may be used should it be available,
so long as the receiver is not operated at excessive levels.
Warning About Excessive Amplifier Distortion
Operating a receiver (of any power rating) beyond its
maximum undistorted output level creates distortion—
added high-frequency sound not part of the musical pro-
gram. Distortion dramatically increases the internal operating
temperature of a loudspeaker and will eventually cause the
speaker's failure due to burned or melted internal parts. While
Cambridge SoundWorks includes the most heat-tolerant
parts commensurate with good acoustic design, the speak-
er's Limited Warranty against defects in materials or work-
manship does not apply to parts that show evidence of hav-
ing failed from long-term operation at very high temperatures

Enclosure Cleaning

The speaker enclosures can be cleaned with a window-
cleaning product. Use a soft, lint-free cloth only. Avoid
spraying any cleaner on the grille panels.
Periodic use of cleaners specifically designed for wood
veneers is recommended for Mahogany and Blonde Maple
finishes.
Brush or vacuum the grille panels if dust accumulates
on them.
1
/ x 18 inches
2
1
/ x 19 inches
2
14 14 14 14