Specifications; Enclosure Cleaning - Cambridge SoundWorks NEWTON HD MC600HD User Manual

SPECIFICATIONS

Warning About Excessive Amplifier Distortion:
Operating a receiver (of any power rating) beyond its maxi-
mum undistorted output level creates distortion – added
high frequency sound not part of the musical program.
Distortion dramatically increases the internal operating tem-
perature of a speaker and will eventually cause the speak-
er's failure due to burned or melted internal parts. While
Cambridge SoundWorks includes the most heat-tolerant
parts commensurate with good acoustic design, the speak-
er's Limited Warranty against defects in materials or work-
manship does not apply to parts that fail from long-term
operation at very high temperatures.

Enclosure Cleaning

The speaker enclosures can be cleaned with a soft, damp
cloth or mild cleaner.
Brush or vacuum the grille panels with a soft brush attach-
ment to your vacuum cleaner.
Specifications
Dimensions: 25-3/8" H x 7-1/8" W x 3-15/16" D
Weight: 14-1/2 pounds each
Impedance: nominal 8 ohms
Recommended amplifier power range: 20W – 100W RMS
per channel.
Frequency Range: 80Hz – 24kHz.
Woofer Type: 4 x 3-1/2" with co-injection molded composite
cones and butyl-rubber surrounds.
Tweeter Type: 1/2" aluminum dome with ferrofluid-damping
and neodymium magnet.
Crossover: 2-1/2 way, series-connected with selectable
wall-mounting compensation.
Enclosure: High-density pressure-cast aluminum with
molded-composite baffle.
Appendix
®
BRAND
AF6 TM ALLIGATOR
Solid-Wall Anchors
1
1/4"
Drill 1/4" diameter hole — minimum hole
1 1 /
depth ". Insert anchor and tap flush.
2
2a
Place item over anchor. Insert screw and
tighten flush. For best results use screw
gun for installation in solid walls.
2b
In walls of minimum thickness 3/8",
screw opens anchor and locks securely.
Patented under U.S. Patent Nos. 4,752,170 and
5,161,296; and foreign counterparts thereof.
Other patents pending. TOGGLER and typeface,
and ALLIGATOR are worldwide registered
trademarks of Mechanical Plastics Corp.
© 2002 MPC
®
BRAND
TM
AF6 ALLIGATOR
Solid-Wall Anchors
1
Drill 1/4" diameter hole — minimum hole
1 1 /
depth ". Insert anchor and tap flush.
2
2a
Place item over anchor. Insert screw and
tighten flush. For best results use screw
gun for installation in solid walls.
2b
In walls of minimum thickness 3/8",
screw opens anchor and locks securely.
Patented under U.S. Patent Nos. 4,752,170 and
5,161,296; and foreign counterparts thereof.
Other patents pending. TOGGLER and typeface,
and ALLIGATOR are worldwide registered
trademarks of Mechanical Plastics Corp.
© 2002 MPC
10
®
®
®
BR
AF6 TM ALLIGA
Solid-Wall An
1
Drill 1/4" diameter hole —
1 1 /
depth ". Insert anchor
2
2a
Place item over anchor. In
tighten flush. For best res
gun for installation in soli
2b
In walls of minimum thick
screw opens anchor and
Patented under U.S. Patent Nos. 4
5,161,296; and foreign counterpar
Other patents pending. TOGGLER
and ALLIGATOR are worldwide re
trademarks of Mechanical Plastics
© 2002 MPC
®
BR
TM
AF6 ALLIGA
Solid-Wall An
1
Drill 1/4" diameter hole —
1 1 /
depth ". Insert anchor
2
2a
Place item over anchor. In
tighten flush. For best res
gun for installation in soli
2b
In walls of minimum thick
screw opens anchor and
Patented under U.S. Patent Nos. 4
5,161,296; and foreign counterpar
Other patents pending. TOGGLER
and ALLIGATOR are worldwide re
trademarks of Mechanical Plastics
© 2002 MPC