Cambridge SoundWorks NEWTON T100 User Manual
  1. Manuals
  2. Brands
  3. Cambridge SoundWorks Manuals
  4. Speakers
  5. NEWTON T100
  6. User manual
Cambridge SoundWorks NEWTON T100 User Manual

Cambridge SoundWorks NEWTON T100 User Manual

Newton series tower loudspeakers
Hide thumbs
Table of Contents

Advertisement

Quick Links

Newton Series
™
T100
Tower Loudspeakers

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NEWTON T100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Cambridge SoundWorks NEWTON T100

Summary of Contents for Cambridge SoundWorks NEWTON T100

  • Page 1 Newton Series ™ T100 Tower Loudspeakers...

  • Page 3: After Unpacking

    INSPECTING FOR DAMAGE Examine the speaker system carefully for shipping damage. If there is any, do not install or use the system. Return the speaker to the store where you made the purchase or call Cambridge SoundWorks at 1-800-FOR-HIFI (1-800-367-4434) for assistance.
  • Page 4 STAND AND FOOT ASSEMBLY Attach the stands to the base of each speaker using three bolts for each stand (see diagram). The stands are identical. Tighten the bolts securely. Choose which foot option is correct for your situation: Disc Feet: The disc feet insure stable speaker place- ment on most flat surfaces and low pile carpet.
  • Page 5 Hand twist the lock nut down onto the disc foot to secure. Disc Feet With Spikes Installation: It is difficult to move the speaker once the spikes are installed on the stands. Install the Disc Feet on the speaker first and determine exactly where you want to place the speaker on a carpet, then change the feet to exposed spikes.

  • Page 6: Speaker Placement

    This helps create a cohesive sonic presentation across the left, center and right front speakers. Avoid positioning the face of either speaker near a wall. Reflected sound will degrade the overall accura- ˚...

  • Page 7: Speaker Wire Preparation

    This manual refers to a “receiver” throughout, but all the instructions apply to integrated amplifers or preamp/power amplifier setups as well. Use at least 18 gauge speaker cable for short runs (under 15 feet). Use 16 gauge or heavier speaker cable for longer runs.

  • Page 8: Making The Connection

    (–) connector. 4. Connect the other speaker cable’s conductors to the other speaker. 5. Connect the opposite ends of the speaker cable to the speaker outputs of your receiver. Remember to observe channel and polarity (Left Positive, Left...

  • Page 9: Specifications

    Enclosure Cleaning The speaker enclosures can be cleaned with a window- cleaning product. Use a soft, lint-free cloth only. Avoid spray- ing any cleaner on the grille panels.
  • Page 12 CAMBRIDGE SOUNDWORKS, INC. 26 Dartmouth Street, Westwood, MA 02090 Telephone: 1-800-367-4434 Fax: 1-978-475-7219 P81-2120...

Table of Contents