Numbering Function - Brother P-touch 2300 User Manual

This function can be used to print many copies of the same text while increasing a certain
number in the text by 1 after each label is printed.
To use the Numbering function:
1 Press f, w, h or e to position the cursor below the number that you wish to
increase.
2 Hold down c and press O. The message "NUMBER UNTIL" appears in the display
with the current setting.
3 Press a number key between 1 and 9 (or press h or e) to select the last num-
ber that is to be printed.

To cancel the Numbering, hold down c and press O (or press just * ).
4 Press p (or r) to begin printing the labels. The number of each copy is displayed
while it is being printed.

If the Auto cut function is set to ON, each label is automatically cut off after it is
printed.
EXAMPLE
To print three labels with numbers 1, 2 and 3:
1
Position the cursor below "1".
2
Hold down

NUMBERING FUNCTION

c O
and press
Alt
Caps
.
Alt
Caps
53