Auto Cut Function - Brother P-touch 2300 User Manual

h
4
Press
r
5
Press
The Auto cut function allows you to set whether or not the machine will automatically cut off
each label after it is printed. Turn on the Auto cut function before starting to print in order to
cut off the labels automatically after printing them.
To turn on or off the Auto cut function:

After printing a label with the Auto cut function set to OFF, hold down c and press
_ once to feed the tape, then cut it.
1 While holding down c, press Z once, and keep c held down to display the
current auto cut setting.
2 While still holding down c, continue pressing Z until the desired auto cut setting
is displayed.
3 Release c to apply the selected auto cut setting.
EXAMPLE
To turn on the Auto cut function:
1
While holding down
and keep
until 5.0inch is displayed.
.

AUTO CUT FUNCTION

c
, press
c
held down.
Alt
Caps
Z
once,
Alt
Caps
51