Table of Contents
Advertisement
Accessory Slot and GOBO Holder
The Accessory Slot is located under a sliding plate fixed by two screws. When nothing is
installed this cover prevents light spillage from the fixture. Under the cover are two different
sized slots. The larger slot can accept accessories like Irises or GOBO rotators. The smaller
slot is generally reserved for fixed GOBO holders and variants are available to accommodate
either metal or glass gobos.
Gobo Size
Outer Diameter
37.25mm
Image Area Diameter
17mm
Basic Setup Wiring Diagrams
There are two basic ways to use the fixture. One is in standalone, which does not require the
use of any data lines to be connected nor any controller, each fixture would operate
independently based solely on the menu setting. The second method, is to use the units in DMX
control. The second method requires the fixtures to be wired together via the DMX DATA in and
out cables. This allows the units to receive data either from the master unit or the DMX
controller. Data wiring is explained in more detail in the DMX Data Connection section of this
manual.
Example Block Diagram
8
Advertisement
Table of Contents
