Table of Contents
Advertisement
Installing Lens Barrel
A Lens Barrel is required but sold separately to combine with the fixture and are
interchangeable. This Lens Barrel determines the Beam Angle of the fixture. Select the angle
best suited to the application.
TA-SCLPMLENS/14
TA-SCLPMLENS/19
TA-SCLPMLENS/26
TA-SCLPMLENS/36
To install Lens Barrel:
1. Unscrew the two Focus Knobs from the
Lens Barrel.
2. Choose the orientation that puts the Color
Frame Locking Clip is in the most 'up'
position to prevent color frames from
accidentally falling when unlocked.
3. Reinstall Focus Knobs, adjust lens back
and forth to set desired focus, and tighten
knobs.
Beam Chart
Approximate Diameter at Distance for given Beam Angle (feet or meters)
14 degree for mSculpt Profile
19 degree for mSculpt Profile
26 degree for mSculpt Profile
36 degree for mSculpt Profile
7
Advertisement
Table of Contents
