Do not allow adaptor or AC power cord to be pinched, bent, or placed in high temperature areas. • Unplug the product if it is no longer in use. • If the metal part of plug is stained with dust or water, please wipe carefully. www.hydrofarm.com...
Page 3
INSTRUCTIONS SUPPLIED ACCESSORIES 1. Installation Guide x1 8. Foam Plant Sponges x 4 2. 100-240Vac Power Adaptor x 1 9. Air Stone x 1 3. Water Reservoir x 1 10. Clip x 1 4. Styrofoam Board x 1 11. Spray Bottle x 1 5.
Always keep water at “water level” marked in the reservoir. • Use the spray bottle to keep plant moist. • Use a fan for air circulation. * WARNING - Temperature higher than 90°F or lower than 47°F will cause death of plant. www.hydrofarm.com...
INSTRUCTIONS TIMER AND FUNCTION SETUP The GLC0100 control panel makes it easy to grow plants efficiently. CLOCK SETTING Set start time and finish time with steps below Press to select CLOCK SETTING “CLOCK SETTING”, and press HH (hour): press CLOCK SETTING...
Page 6
AIR PUMP SETTING “AIR PUMP SETTING”, and press Press to select AIR PUMP SETTING 5 MINUTES 5, 10 or 15 minute intervals, and press AIR PUMP SETTING 10 MINUTES AIR PUMP SETTING 15 MINUTES Display “OK” means finish. www.hydrofarm.com...
Page 7
INSTRUCTIONS FORCE LED TURN OFF/ON NOW User is able to force LED turn on/off by personal request. System will return to user’s previous set up operation (If user did not set up, system will operate factory preset mode). LED Light status: ON LED TURN OFF NOW Press to select...
Hydrofarm will, at our discretion, repair or replace the GLC0100 covered under this warranty if it is returned to the original place of purchase. To request warranty service, please return the GLC0100 , with original sales receipt and original packaging, to your place of purchase.
Need help?
Do you have a question about the GLC0100 and is the answer not in the manual?
Questions and answers