Hydrofarm Light Track Instructions

Hydrofarm Light Track™ Instructions

CHECK FOR SHIPPING DAMAGE

Upon delivery of your equipment, note any dented, deformed, or opened boxes to the
delivery company. We can send replacements as soon as the carrier calls and confirms
that the damaged parts are coming back to us.

INSTALLATION AND INSTRUCTIONS:

The Light Track needs to be mounted to a base (i.e. wooden 2" x 4") attached to a stud or
studs in the ceiling.

PARTS:

Tools Required:
• Screwdriver
• Pliers
• Stepladder / Stool (optional)
• 2" x 4" wooden base
1. Locate hardware:
• Wood screws................................................................x 6ea.
• Nylon washers...............................................................x 6ea.
• Ceiling hook.................................................................x 1ea.
• Cable ties.....................................................................x 2ea.
• Cord strain relief............................................................x 1ea.
• "S" hooks....................................................................x 4ea.
• Chain.........................................................................x 2ea.
2. Locate the ceiling studs and ensure that the mounting holes or wooden base aligns
properly.
3. Use all of the provided screws to secure the track to the ceiling. DO NOT mount
the track into drywall/sheetrock only.
4. If you cannot locate the appropriate studs in which to mount the track we suggest
acquiring some expansion-type toggle bolts from your local hardware store. Pre-
drill the appropriate size holes and mount the unit with washers between the track
and ceiling.
5. Turn on the unit and watch it for a full cycle to ensure proper function, and then
turn it off.