Pre-Operation Checks; Check The Engine Oil Level - Honda HHB25 Owner's Manual

For safe and efficient blowing, always make a pre-operation
inspection before operating.
Perform a pre-operation inspection on firm, level surface with the
engine stopped and spark plug cap removed from the spark plug.

Check the engine oil level

CAUTION: Running the engine with insufficient oil can cause serious
engine damage.
1. Place the handy blower on a level surface and remove the oil filler
cap.
2. Check the oil level: It should reach to the edge of the oil filler neck,
and check the engine oil for contamination and deterioration.
3. If the oil level is low, fill to the edge of the oil filler neck with the
recommended oil.
If the oil is contaminated or deteriorated, replace it (see page 38).
4. Reinstall the oil filler cap.
Check the oil level and replenish oil up to the top of the oil filler neck if
the engine is operated for more than 10 hours continuously.
ENGINE OIL CAPACITY: 0.08 L (0.08 US qt, 0.07 Imp qt)
OIL FILLER NECK

5. PRE-OPERATION CHECKS

OIL FILLER CAP
UPPER OIL
LIMIT
19